Asked in Computer History, Electrical Wiring
What is an xlr cable?
XLR refers, not to the cable (wire) per se, but actually to the type of connector used. An XLR connector has 3-pins and is used primarily in audio. Professional microphones and other audio equipment use it. Of the three pins, two are for the balanced signal, and one is for the shield. The wire used then is a two conductor shielded cable using a braided wire or a foil shield. So, an "XLR cable" refers to a two conductor, shielded cable...
Asked in Computer Networking
What is different between XLR cable and Line jet cable?
Connector and impedance
Asked in Grammar, Definitions, The Difference Between
What is the difference between male and female XLR?
Connector. male = pins, female = holes
Asked in Electronics Engineering, Electronics
Why lift ground wire on microphone applications or why would you completely remove the ground wire on any xlr connectors?
You don't want to remove the ground wire because it protects the two wires inside from RF frequencies, but in case you have a ground loop problem, you might want to disconnect the ground using a ground lift. ...
Asked in Audio Editing and Recording
How Do you wire a USB condenser Microphone to a Behringer Xenyx 302 Mixer?
You cannot connect a USB microphone to a mixer. It must be connected to a computer. The Behringer 502 can accept any dynamic or condenser microphone with an XLR connector . ...
Is AKG C520L Wireless Headset Microphone has 4 Pin HRS Connector ?
No, it has 3-pin mini XLR.
Asked in Sony Playstation
What you think is called a socket that a XLR cable plugs into?
It's also called XLR. If it has pins, it's XLR male, if it has holes, it's XLR female. ...
Asked in Television and Video, Cameras
Why would a camcorder need an XLR adapter?
XLR is a type of audio connector used in professional audio and video equipment. The three pin XLR is used universally for microphone and single channel audio signals. An XLR adapter is used to connect a professional audio signal to an alternative format. On a camcorder, it might be used to connect a low cost microphone or radio microphone receiver to the XLR input on the camera. One might be used on the audio output of the camcorder to connect to a...
Can a two wire speaker system with RCA plug be chnaged to a XLR 3 without chnaging the speaker impedance?
If the system supports it, yes.
Asked in Home Theater
Can you connect 2 separate XLR inputs to one quarter inch RCA outputs?
Normally, you can. To be clear, RCA connectors (known as phonos in Europe) are not 1/4" jacks. The two are different types of connector and for this answer, we will assume that the connector is in fact a 1/4" jack rather than RCAs. There are several wiring configurations depending on how the 1/4" jack is wired. If the jack socket carries a stereo audio signal (like a headphone output), this is the right configuration: The tip of the 1/4" jack is wired to...
What is difference between an Excel XLR and XLS file?
XLR is made in Microsoft Works
What type of connector is used when hooking up DMX lights?
Simply put, all lighting devices carrying a DMX protocol use an XLR type connector. However, the industry standard in stage lighting involves using a 5-pin XLR connector. Most conventional consoles and dimmers use 5-pin connectors, but nowaday, 3-pin XLR connectors are also being used - in perticular in 'intelligent' or moving head lights. These do not function any differently to a 5-pin connector, just all the signals are merged into fewer pins. The reason why the industry standard is still 5-pin, is...
Asked in Musical Instruments
How can you transform stereo phono outputs to balanced XLR inputs?
You can solder the unsymmetric stereo phono outputs to the balanced XLR inputs ...