0
What else can I help you with?
What kind of rod is use for braze welding?
Brazing isn't welding - it's more like soldering. You use a rod made out of brass for the process of brazing.
Is brazing more like welding or soldering?
It is closer too soldering, just more heat, tin/sliver instead of solder and brazing flux instead solder flux. More like welding as far as strength is concerned. It is very strong and is used on larger diameter pipes. however application is the same as soldering
What is the max temperature at which soft soldering is done is?
The maximum temperature for soft soldering typically ranges from 350°C to 450°C. Soft soldering involves using a lower temperature compared to other soldering methods like brazing or welding in order to join metal components together. Exceeding this temperature range can risk damaging the materials being soldered.
What are the assembly joining methods?
Some common assembly joining methods include welding, such as MIG or TIG welding, riveting, using adhesives or fasteners like screws and bolts, soldering, and brazing. Each method has its own advantages and is chosen based on factors such as the materials being joined, strength requirements, and cost considerations.
What is a structure that uses melted joints like soldering and welding?
shell structure
What is different between fusion and non fusion welding?
Fusion welding joins materials by melting them together, while non-fusion welding joins materials without melting them. Fusion welding includes processes like MIG, TIG, and arc welding, where a filler material may be added. Non-fusion welding methods, such as friction welding or ultrasonic welding, rely on pressure or friction to create the bond between materials.
What is difference between welding and weld-ability?
ANSWER:Soldering is a joint repair for two pieces of metal, like a chip to a circuit board using lead. Welding is taking two pieces of metal and heating them up to the same temperature and making a single piece of metal out of two separate pieces. I was taught that soldering,as it relates to piping, is the heating of the base metal to a point to where the filler metal will melt and fill the gap between the two pieces of metal being soldered. The base metal is NOT melted, only the filler metal. Soldering is usually used to join non-ferrous metals. Welding is when the base metal is heated to a point where it will melt and , with the filler metal, becomes part of the weldment. In other words, the two pieces become one, and the resulting weld is now a blend of base metal and filler metal.soldering is a very low heat (melting temperature of the soldering alloy is less than 840 degrees Fahrenheit), semi-adhesion process, final product: 2 base materials, and a filler material on top. welding is high heat fusion process, final product: a solid blended material
What do people use to combine copper and tin?
Copper and tin could be melted and combined as an alloy, They can also be fastened together by some form of brazing, like soldering.
What is a MAPP gas torch?
Well, darling, a MAPP gas torch is a tool used for welding, brazing, and soldering. It uses MAPP gas as fuel to produce a hot flame for melting metals. Just be careful not to singe your eyebrows - unless you're going for that avant-garde look.
How can welding copper to stainless steel?
It is challenging to directly weld copper to stainless steel due to their differing physical properties. However, a possible method is to use a dissimilar filler metal that is compatible with both materials, such as nickel-based or silver-based filler metals. Another option is to use a mechanical joining technique, like brazing or soldering, which can bond the two materials together effectively.
What is the difference of a soldering iron and a soldering gun?
A soldering iron is a straight tool, sort of like a long screwdriver. A soldering gun actually looks like a gun or a drill.
How can one fix a soldering equipment like the soldering iron?
It depends what is broken at the soldering iron. It can be that the equipment should be repaired by a professional electrotechnican. It is not recommended to fix tools like this by the person itself.
