The star-delta starter allows the motor to start with one third its normal power, minimizing inrush current and heating, thus extending the life of the motor and its control center.
When a motor is connected in star the total output torque is only a third of the total torque that could be produced running in delta.
Please see related questions and links.
No difference. Y is used as a symbol to indicate the star connection.
In manual star delta starter, the change over from star to delta does not happen automatically. The operator or user puts on the starter, and after few seconds he pushes a lever or handle to change over to Delta. In automatic method, change over happens from star to delta using an automatic preset timer.
I assume a 3 phase, AC induction motor. A star delta starter or a soft starter can be used. A soft starter is better compared to a star delta starter, but it is more expensive.
In manual star delta starter, the change over from star to delta does not happen automatically. The operator or user puts on the starter, and after few seconds he pushes a lever or handle to change over to Delta. In automatic method, change over happens from star to delta using an automatic preset timer.
DOL, Star Delta, Soft starter, VFD
If a motor is connected in a star configuration it will operate at a slower speed. This is the working process that a star delta starter operates on. At first through the starter the motor starts in the star connection. When the motor gets up to its highest speed in that connection it times a timer out , the star starter drops out and the delta starter pulls in and then connects the motor in the delta connection. This allows more voltage to be applied to the motor and it then speeds up to its nameplate rated RPM.
delay timer
Check the star - delta wiring. It does not seem to be correctly wired.
Probably. More importantly, why would you want to? The Star/Delta starting method is used to minimize motor starting current, just like a soft starter. Use one or the other. There's no good reason to use both, it will just make things more complicated.
Nope .. Never heard of it .
The use of a star delta starter is for motor control only and not resistive heating loads. This type of starter is used to dampen the inrush current by using a lower voltage to start the motor.
its is very simple whem motor shifted on delta then timer will disconnect