This happens because wire have less resistance.
a insulator
Positive electric fields attract negative charges while negative electric fields attract positive charges.
ambot
An electric motor converts electric energy to mechanical energy while a generator converts mechanical energy to electric energy.
The cord is manufactured to have as low a resistance as possible, while the heating element is intentionally manufactured with a carefully controlled resistance. The current through the whole loop ... cord plus heater ... is determined by the resistance of the whole loop. The magnitude of the current 'I' is (E/R) ... E = the utility line voltage, R = resistance of the cord+heater. But the power dissipated by each individual resistance in the loop is proportional to the resistance of that section. P = I2R. So the heating element dissipates more power than the low-resistance line-cord does.
In a series circuit the current remains constant at any point while the voltage drops across each resistive element.
The heating element of an electric heater is a "resistor", the cord which conducts the electricity is not. The resistance of the element of an electric heater is very high. As current flows through the heating element, it becomes red hot and glows. On the other hand, the resistance of the cord is low. It does not become red hot when current flows through it.
While traditionally electric cars have had a reputation of having limited driving ranges before needing to be recharged and long recharging times, that is changing. The battery technology is improving, which is leading car manufacturers to have more dedication in their search for the perfect electric car (hybridcars.com/electric)
graphite is a non metal and an element and because it is a weak conductor of electricity it lets electric current and heat flow through it and when electric current passes through it it faces resistance and glows.
The element is made of special high resistance wire so the power is dissipated in the element rather than the low resistance cord.Power(watts) = Resistance (ohms) X {Current(amperes)}squared
An ion of any element has a nonzero electric charge while the "normal" atoms of the same element have zero electric charge. Atoms become ions either by losing electrons or by gaining electrons. Lithium (being on the left side of the Periodic Table) will usually tend to lose electrons, becoming positively charged.
No, gloves are not necessary while using an electric drill.
This switch turns on an electric element inside the heater box so that you can warm your toes and defog the windscreen while the coolant temperature is rising in the engine. The idle speed does increase while the coolant is cold to compensate for the 25 amps or so that the element draws from the battery. As the coolant temp increases the element will switch off and the idle speed will go back to normal.
Glenn Seaborg was the scientist who had an element named after him while he was still alive.
Yes you are correct, potassium being an alkali metal is definitely more reactive than argon which is a noble gas (group 18 element). Potassium reacts violently with just water while argon is very inert and stable, which is why it remains in the atmosphere as a monatomic element.
In medical contexts, efferent means leading away, while afferent means leading towards.
They shouldn't if you get an electric shock while playing there is a fault with your equipment.