If yours is like Mine? It is defective. Need to take unit out. It is behind Glove box. Have to remove it to get it out. Mine started as a Dimmer Switch, Headlight Switch. Then all systems shut down. Seats would move all the way Back & flat. Windows & door locks Radio inoperative. Plus have 4 trouble Lights. Catch the Drift
Not without other problems, if the alarm module is removed the engine controller See's it missing on start up and thinks it was tampered with and locks off the fuel system giving it a no start. Better to have the problems fixed.
Take out the horn relay switch in an emergency. Without the alarm sounding off you can actually start to think...um...
Use your key in the drivers side door turn it both ways
in my past experience in alarms there should be a button hidden under the dash in your car The factory alarm is reset by turning the key in either front door or the liftgate.
yes
AnswerTry contacting the dealer they maybe able to use your VIN# and get you a new remote.Try unlocking the doors and trunk with the key.
to reset the alarm system for a Mercury Sable when the alarm is causing the car not to start, place the key in the ignition. Turn the key only about halfway and leave it in this spot for 10 minutes before trying to start the car.
how to reset hornet alarm,, cause my car can't start..alarm still active,,
alarm does not work can not start car help
Insert the correct key into the ignition switch and start the engine. That should shut the alarm off.
manualy unlock the passenger door with your door key,while the alarm is going off.it may take a few trys but it will work. the car wont start after alarm going off, do i need a new battery or can i just turn off the alarm and the car is a 1994 Chrysler lhs
it depends on the what system you are talking about and the car it is going in, you have the car alarm system, remote start system, alarm system, and car stereo system, and every car is different