There can be hundreds of reasons. You have to remove the door panel and the power door mechanism.
No, it will not.
You can but, on a 2010 Camry the window module should be covered in your warranty. Even if you bought the car from someone else the manufactures warranty should transfer to you. If for some reason your Camry is out of warranty you first need to determine if it is the module or the window regulator. Good luck
Mercedes window wont go up
Yes it's the same window. The windshield doctor
The power windows on a 1999 Toyota Camry's driver's side window may not roll up if the fuse or motor are bad. You should replace the fuse or take it to a local dealership for diagnosis.
Hi, I have a 92 Camry v6LE with the same problem, now on 3 windows. It just slides down and won't come up. I'm just now opening up the window to look inside, and as far as I can tell the cable is not doing what it should; it's loose. I wish there were a description about how this is supposed to work, so I could tell what's wrong. Sorry this isn't an answer, but it could point to where to look: possibly the cable mechanism is screwed up.
I paid only $100 to have this done at the Toyota garage. The driver's window wouldn't go up on a drowning rainy day in Houston just after I had opened it under a protective drive through!
I think it is on the side of the kick panel next to the fuse box.
Check the fuse box for blown fuses.
Remove the door panel, handles, and pulls, and look in there. Something got loose - hopefull not broke. Glue it back into the window riser frame if nothing is kaput.
Well lets eliminate the switches for now. Get some extra long wire and hook motor up directly to battery just to see if you can get motor to work. make sure you use positive to positive and negative to negative or ground on motor. If this makes motor work you may want to check switches or possibly a non grounding situation.
un plug the connector at the window regulator, check for 12V, if you have it when you press the switch up or down, its your regulator, if not it mat be the window switch or a problem further up a wiring diagram Justin