0
When you wind a current carrying wire into a coil, it causes the concentration of the magnetic field line to intensify. Depending on which pole of the magnet is in the up position, the wire will move towards or bend away from it.
Wiki User
∙ 15y ago
Wiki User
∙ 14y agoWhen a magnet passes through a coil of conductant material, an electric current is induced within the conductor (coil material). This current will flow through the rest of the circuit system. Alternatively, when a current is applied to the coil, an electromotive force is induced within the coil and can subsequently push the magnet. This is known as a solenoid.
Wiki User
∙ 14y agoAn electrical current will be generated in the wire if the wire crosses the magnetic lines of force.
Wiki User
∙ 14y agoCurrent will try to flow when the coil moves across the earth's magnetic field.
The current will only be able to flow if the ends of the coil are connected together.
Wiki User
∙ 12y agoIt becomes an inductor. These are used to smooth out AC current. Also a magnetic field flows through the center of the coil.
Wiki User
∙ 8y agoWhen coil is moved in a magnetic field in such a way that the magnetic flux linked with the coil gets changed then an emf i.e. electromotive force is induced in beween the ends of the coil
Add your answer:
Earn +20 pts
Does the ground wire on a 200 amp panel need to be looped through both ground rods?
Not looped but connected to both ground rods and then connected to the meter base.
What heat can a small copper coil produce at 120 volts?
Need to know what the size of the wire is in the coil and the physical diameter of the coil.
Why doesn't my snow blower throw snow as far anymore?
Either your coil is shot or your kill switch is stuck closed. If you warm it up (above freezing) and it still doesn't have spark, bet on the coil being bad or if you are lucky, the sparkplug wire is cracked and grounded. you can isolate & test the coil by removing the engine shroud, you will find one thin green or black wire going into the back of your coil, disconnecting this wire will isolate the coil from the rest of electrical system. recheck spark with the wire disconnected, if you still dont have spark you need a new coil, if now have spark it means your coil is working and either a switch or a bad wire is grounding the system.
How alternating voltage is generated in a coil of wire when it is rotated between the poles of a magnet?
Electical current.=============================Answer #2:When a coil moves in the vicinity of a magnet, a voltage between the endsof the coil is produced. If the coil happens to be part of a closed circuit, thenthere could be an electrical current.Answer #3When a coil moves through a changing magnetic field, a voltage is produced, and when a resistor is connected to the coil some current flows and power is produced in the resistor. This power comes from the mechanical power needed to push the coil through the magnetic field when it carries a current.
What has a wire-wrapped core?
A coil of wire or a coil in the shape of a cylinder is a typical shape for an electromagnet (or a solenoid). The strength of the magnetic field of an electromagnet can be increased significantly if the coil is wrapped around an iron core. This configuration may be called an inductor when used as an element of an electrical circuit.
What happens insider generator?
A coil of wire spins in a magnetic field
What happens when electric current passes through a coil of wire?
A magnetic field generates around the wire.
What happens to the coil of wire when someone presses the switch?
If the coil is connected to a circuit and the switch is closed then, provided there is a power source, the coil will become energized.
Where is the coil wire located on a 1997 Chrysler Sebring LXI 2.5L?
The coil is inside the distributor. There is no coil wire.The coil is inside the distributor. There is no coil wire.
Is coil a type of wire?
yes coil is a type of wire
Which wire goes to the coil on a Honda nsr125 1998?
The coil wire.
Where is location of coil wires 8N ford tractor?
The coil wire runs from the coil to the center of the distributor cap.The coil wire runs from the coil to the center of the distributor cap.
Where is the coil wire on a 1995 Buick Riviera?
There is no coil wire. There is a coil pack and connected to the coil pack is the ignition control module.
What would cause the coil wire to burn out at the coil end of the coil wire on my 93 Toyota Camry?
Toyota Camry coil wire can burn out from age or excessive use. The manufacturer recommends that you change the coil wire every 30,000 miles.
Where is the ignition coil located on a 95 Honda Accord 2.2 4-cylinder?
If you see no center coil wire connector then the coil is mounted inside the distributor. If there is a center coil wire connecter then follow the coil wire and it will go to the coil.
Does the ground wire on a 200 amp panel need to be looped through both ground rods?
Not looped but connected to both ground rods and then connected to the meter base.
What happens when the current in the coil is halved?
What happens when the current in the coil is halved? No pins are attracted. ... A magnetic field is always created around a wire when it carries electric current.
