the four wheel drive on this unit is vacuum assisted actuator located near the battery. It looks like a diaphragm with a cable thast goes to your front end to move the pickle sliding the axles in lock. The vacuum comes from the torque converter at a vacuum swicth locate don the right side of the torque converter with 3 lines coming from it. One of tyhese lines could have a hole or rotted losing vacuum. To see this you will need to remove the skid plates. If you find a bad line tie a string to the hoses and pull them thru, when you rep;lace the line, use the string to pull them back thru. Look at the plastic plug and notice the notch on it and compare to the notch on the vacuum switch. Vacuum switch is $39.00. Check to see if the actuator cable isn't frozen up or kinked, rusted. To do this push in on the diaprahm. Thge cable should move freely. Now can someone help me? Why wont my blazer make vacuum for the same reason?
how do you set the timing on a 1993 Chevy pick up
They are designed to run highway speed in four wheel drive on wet and slippery roads . Using four wheel drive on dry pavement is hard on the drive line .
19 Gallons.
four wheel drive actuator less then $50 online at http://www.autozone.com. the four wheel drive actuator is basically an electronic hub locking system. replacing this part should fix 'er up! p.s. i have a '94 s10 blazer vortec v6 same problem and it worked!
what is it not doing
You need to specify exactly which component you had in mind.
36mm
No, only properly equipped four wheel drives with a Neutral position in the transfer case.
Rear wheel drive or four wheel drive.
TCCM Transfer case control module
why wont the light come on the 4x4 drive
No. A "all wheel drive" is all the time four wheel drive. A 4x4 or 4-wheel drive can be set to drive in two wheel drive or four wheel drive.