Want this question answered?
on transmission there is a 10mm screw with a cable running to it remove screw and gear and use gear as dipstick
Idk all of them, but I installed a tach in my 97 aspire, and 65 mph in third gear is at about 6k rpm. idk what the redline even is, so i hardly ever take it past 5.5k. lol.
i have a 95 ford aspire automatic..rebuilt the trans but high gear and reverse does not work when wheels are on the ground...no power..what can i do I have the answer to both questions email me at elccabron@hotmail.com and I will send the diagram and the service prcedure to fix the no reverse and 3rd gear problem
why want my 2003 ford superduty change into 3rd gear
Why wont my 1994 Ford Taurus GL 6cyl Auto transmission shift into third(high) gear. It will only reach speeds of about 35mph +/-
my 97 aspire did this had it checked out and all tha was wrong was my timing was off and had to be adjusted
Because its a Chevy corsica not a ford corsica!!!!!
If a vehicle, manual or automatic, does not shift into a certain gear, there may be a problem with that gear. Gears get worn and need replacing in a vehicle's lifetime.
The 1997 Ford Aspire owners manual ( view on-line at www . motorcraft service . com - no spaces - click on Owner Guides ) shows Motorcraft MERCON for the automatic and manual transaxles . Approximate capacity for the manual transaxle is ( 5.2 quarts / 4.9 liters )
Yes it is possible, especially if it was not fully in gear and a manual transmission. If it is an automatic, it must be in Park to hold. Always set the parking brake.
It wants to go to third and fourth gear as the road speed increases so as to allow the engine to run at a more optimum speed.
Street Gear - 1995 was released on: USA: 1 June 1995