0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you install the mower deck on a LT133 tractor?
The deck must be slipped beneath the machine from the left, the lift lever locked down and the rear hangers and front hanger plate attached. The belt will take take a 90 degree twist with the front part to the left side.
How do you level the deck on a john deere lt150 lawn mower?
http://manuals.deere.com/cceomview/OMM143122_E0/Output/Index.html?tM=HO
What year is your John Deere lawnmower?
Write down the serial number which should be printed on a serial number tag somewhere on the mower. Take the number to your local John Deere dealer and they should be able to tell you what year your mower was produced.
A belt diagram for a john deere L120 48 cut?
I will put a link to the Deere deck page below. Just scroll down to the L Series 48"
How do you remove deck from John Deere lx178?
You first need to set the mower deck setting at high noon to read "blank". More or less between the 1" and 3.5" setting. Then pull deck release arm to allow for the deck to drop to the ground. Once locked into the down position, you need to release the U locks(that are spring loaded) located on the back half, and on both sides of the mower deck. This will allow for the arms that you have unlocked to be retracted up for clearance later. After that you must release the tension bar for the belt pulleys located on top of mower deck, left hand side, and remove the belt connected to the engine pulley located towards the front. After that, you must unlatch the front U-bar from the mower deck. After this is completed. Pull the mower Deck ARM back up, to the position normal for traveling. This will give you clearance to slide the mower deck out from the right side (chute side).
How do you remove the deck on a john deere lx176?
1. release the tension rod on the left side of the deck and swing it outward 2.on front left axle pull lever out that keeps tension on the u shaped draft bar that hooks into the front of deck and swing it down towards you 3. pull out spring loaded j hooks on each side of rear deck 4. once hooks are released deck will come down,then slide deck out of the discharge side of mower,turning whells to make it easier
Remove deck from john deere 345 mower?
alot of work but if your willing ill tell u first remove the belt from tensoiners then remove cotter pins and mover bars the ones that look like bars the back is bolted remove bolts and it should drop down
What direction do the blades on a john deere riding lan mower turn?
if you are sitting in the seat and looking down at the deck the blades will or should be turning clockwise, although in this position you cannot actually see the blades. pay attention when installing the blades not to turn them upside down. the cutting edge should be turninh clockwise on all blades.
Who sells more tractors John Deere or case?
No John Deere break down all of the time where i work they have John Deere and it seems like they spend more time in the mechanic then being used for work
How can find the year on the serial number on John Deere LT 180?
Write down the serial number and take it to your John Deere dealer.
Mower deck belt installation for a scotts 20 hp 48 inch mower deck?
As your sitting on your mower look down on your left side on the deck is a metal arm locked under a hook get off the mower push down on the arm and pull out toward the rear tire this loosens the rear pulley now put belt over the top front pulley and over the rear pulley move metal arm back to hook and lock in place then your done.
Why does my simplicity riding lawn mower slows down when cutting grass. The grass builds up at the discharge.?
blade needs sharpening,or belt is slipping for mower deck.
