What i did to get rid of my warning light problem, was to disassemble to kill switch for the fuel pump(located on the driver side, near the front strut mount under the bonnet) remove the metal ball the connects the middle connector and assemble back up
If the bulbs are working then you just need to change te fuse.
The warning lights are warning indicators meant to indicate something being wrong. When the lights turn red, it means it is in immediate need of attention.
A flasher relay interrupts power to the hazard lights making them flash. The relay can be a dedicated relay or it can be the same relay that operates the turn signals. Depends on the make, model, and year of the vehicle.
When both indicators turn on at the same time they are called the hazard warning lights. These lights warn drivers behind of an oncoming hazard they may not otherwise see. People also use them when they have to pull over so that their car remains visible to other drivers.
get the whole care re wired also dont turn on your hazard lights!!!
Pull the hazard light fuse.
Hazard warning lights meaning you have 4 way flashers on ( all turn signals are on at once)
If the turn signals on a car works but the hazard lights do not there may be a problem with the flasher switch. The flasher is located in the steering column, and a damaged unit can cause the lights to stop working.
Probably because those are warning lights and your car is neither low on oil nor overheating. Alternately check bulbs and fuses.
If you are talking about the flasher is is part of the hazard warning module If you are talking about the flasher is is part of the hazard warning module
Hazard lights are used on a vehicle in an emergency. The driver is supposed to turn the lights on the warn others that their car is experiencing some sort of problem.
yu can turn them on at any speed