Want this question answered?
On the inner rim of your toilet where the water flushes out from the cistern, if these small holes are blocked it wont make the right angled pressure to flush a toilet
The toilet itself is plugged or the pipe from the toilet to the drain is plugged. It may be that the tub and sink have their own drain pipe that may connect to the main away from the toilet drain. Plunge the toilet or sometimes if you fill a 5 gallon bucket with water and pour it into the toilet as fast as it will take it, that will flush out the line. It is a greater amount of water all at once an forces out what the clog is.
the center of a whirlpool is spinning the fastest. the cube is in the center so its spinning equal or a lil slower than the water directly under it but the water neer the edge of the cup is spinning slower.....put something in the toilet, flush it and observe how it spins faster as it reaches the center...........use something that wont clog the toilet
Transformers work on a principle called 'mutual induction' in which a changing current in one coil sets up a changing magnetic flux which links with a second coil, inducing a changing voltage into that second coil. I've emphasized the words 'changing' because its essential if mutual induction is to take place. Alternating current is a type of current that is constantly changing in value and direction, whereas direct current is a constant current -so transformers require a.c. to operate.
put it on charge
On the inner rim of your toilet where the water flushes out from the cistern, if these small holes are blocked it wont make the right angled pressure to flush a toilet
just give it a full flush in your toilet. Oh i believe a half flush wont work!
Yes that is normally the problem with a blockage
Get your hair spray out and spray them down so that way they wont move when you get a napkin and flush them down the toilet
The toilet itself is plugged or the pipe from the toilet to the drain is plugged. It may be that the tub and sink have their own drain pipe that may connect to the main away from the toilet drain. Plunge the toilet or sometimes if you fill a 5 gallon bucket with water and pour it into the toilet as fast as it will take it, that will flush out the line. It is a greater amount of water all at once an forces out what the clog is.
They live till you find them and you kill them but if you flush them down the toilet they wont survive because they drowned in water!!
If your plunger is left in the bowl. :) Since I've been snaking out toilets for many years I come to the conclusion that when a toilet doesn't flush right, the reason is like lightening and it never strikes the same reason twice. So your problem of your toilet not flushing smooth can be a million different problems but 90% of those problems are in the toilet bowl trap. If you plunge and snake the toilet and it still wont flush right then pull the toilet and look at the drain and if its clear then your problem is still the toilet which since china makes stuff so cheap , its almost cheaper to buy a new toilet then to buy the repair kit for your old one, in fact to have me repair your toilet and to have me install a new toilet with buying the toilet would be about the same price so almost everyone gets a new toilet and we live happily ever after.
You shortened the chain too much. Make it longer a link at a time till it works.
It is a rule that businesses have to employ because, some men wont lift the ring when they urinate.
You have to clog the toilet with toilet paper to have the janitor come and then you can grab the nickel
yes but it wont be as effective as tolet cleaner
You haven't unclogged your toilet yet.