0
What else can I help you with?
Your 1993 5.0 mustang will start run for a minute and then shut off and will not restart what is wrong?
You probally ran to many miles on the meter.
What car is fasteer the Camaro or the mustang?
It would depend on how each car is built and what type of track you run them on.
Is a 2012 Mustang diesel or regular gas?
the 2012 mustang will run on regular gas
What will happen if knock sensor is blown?
If your car would run lean the sensor would not be able to determine that and their could be engine damage.
Can a blown intake manifold gasket cause a 1994 Chevy Astro to run rich and foul the plugs?
That would probably cause it to run lean.
How fast are mustang horses?
When Mustang horses walk its about 2 MPH. Also when Mustang horses run walk its about 15 MPH. And when a Mustang horse runs it's about 25-45 MPH.
What would cause a 1999 Daewoo Lanos SE 1.4 liter to run poorly where the engine seems to roar but lacks power?
Yes, as the mixture would run lean and possible misfires could occur.
What would cause a 1993 grand am 4 cylinder to miss and the exhaust to become red hot?
The exhaust pipe will turn red when the engine is running lean. You may have an EGR valve problem, vacuum leak or other problems that can cause the engine to run lean. A lean running engine can burn valves or pistons and causes other problems. Whatever the cause, it needs to be repaired before you put more miles on the engine, otherwise you'll ruin it, if you haven't already.
If my crx runs lean will it overheat?
It could do. DOn't let it run lean. It's very uneconomical and bad for the engine.
What are the release dates for Run Saber - 1993 - VG?
Run Saber - 1993 - VG was released on: UK: 1993 USA: 8 June 1993
Can a cracked intake cause your car to run hot?
yes it will make bring unmetered oxygen in and the o2 sensors will pick it up and it will run lean (lean=hot) (rich=cool)
How do you adjust carb to make it leaner?
The only adjustment that you can lean out would be the idle circuit. That would be done by adjusting the idle mixture screw(s) while monitoring the vacuum and or the engine rpms. To make a carburetor run lean would require changing internal parts such as the jets and metering rods.
