This year of truck has a separate circuit for the trailer turn/barke/tail lights. Look under the hood, under the fuse box. Look for the trailer fuses on the fuse directory
Yes, just like you would anywhere else.
check fuses under the hood
Trailer Lights Work on Other Vehicles but Not MineIF the lights [tail, turn, and brake] are working on your vehicle, AND the trailer lights will work on some other vehicle, that confirms:That the problem is NOT in your vehicle's wiring system.That the problem is either in the trailer wiring, OR is caused by the IMPROPER connection of the connector plug wires to the wiring of your vehicle.It is critical that the connector plugs [on the vehicle and the trailer] are properly connected to the correct wires.The fact that NONE of the lights work when connected to your truck suggests that the defect is related to the GROUND wireas that is the only wire common to all the different light circuits.
The center pin of a seven blade trailer plug is for reverse lights, not power. What type of truck is it? What trailer plug do you have...
I assume you have checked/replaced the bulbs. Take a cicuit tester and check the wire harness connections under the bumper and around the trailer connector if you have one. The problem must be at that area IF all your other lights are working as you said.
Fuse is blown light connector is unplugged ground wire on trailer disconnected
Make sure you have a good ground
Trailer lights are sold at many stores nationwide. You can find trailer lights at home improvement stores. You can also find trailer lights at automobile repair stores.
I would check the running lights for one with a short. I had the same sort of thing with my trailer and I spent way to much time troubleshooting the brake and signal wires. Turns out a running light bulb connector was grounding out on the trailer and messing it all up.
Trailer Lights Not Working ProperlyWithout being able to physically see and troubleshoot the defective trailer light wiring system [from the attachment to the vehicle wiring harness (s) all the way to each of the trailer lamps [light bulbs], one can only speculate.I suspect that the cause for part of the lamp filaments working properly while some don't is the result of connecting some wires to the wrong wires.
Lights are always required to be installed on a boat trailer. This is so no one runs into the back of the trailer, especially at night.
Check the park lamp relay. It is probably next to the fuse.