Want this question answered?
remove plug, use a compresion gauge or put your finger over plug hole, crank engine, if your finger feels like it was being sucked in and then blowen out , its fine, bad compression will give you very little suction, or blow out, could be valves are leaking also,
Semilunar valves are open when the blood is being pumped. The AV valves are closed when the semilunar valves are open.
no she is not married. right know she has a bofriend justin bieber but there is no engagement being planed
do you seriously think that theres a hole in the piston in all the cylinders? or the rings are gone in all the cylinders.. highly unlikely.. the main cause of loss of compression is the rings are burnt gone. the rings are stuck, the valves are stuck, hole in the piston and/or head, bent valves, or the timing chain/belt came off, or broke. with all the cylinders being down, i'd look into the last one. that's the only thing that would be logical to effect all the cylinders evenly.
The higher compression the engine the more power it can theoretically produce. The compression ratio is mainly determined by the type of fuel being used.
The 1987 film is being redone with different actors as an updated version that will be coming to theaters on February 12, 2014.
(under) compression
Compression ratio simply means the difference in size of the original vs compressed unit. Compression ratio is a commonly used term for internal combustion engine piston/cylinder compression and file compression. Ratios differ depending on the type of engine or the type of file being compressed. In file compression, 7zip has the highest compression ratio.
Gate valves used to be, now they are being superseded by ball valves.
They can. The only way to know for certain is to put a new belt on and run a compression test. If one or more cylinders don't build compression after you've properly installed a new timing belt, the piston kissed a valve. BTW, it doesn't take much to bend a valve beyond being usable.
it is under compression since both sides are being pushed towards each other.
It is said to be in a soft shape or in compression.