No brake lights but turn signals work? Turn signal switch brakes route through it.
The bulbs are burnt out.
i have tail lights but do not have brake lights nor do i have turn signals. i have replaced brake switch and all bulbs
Your problem may be with any or all of these three items: The fuse, brake switch or bulbs in the brake lights.
Check sockets and grounds
Check the fuse, check the bulbs, then check the brake light switch.
My Suburban doesn't have bulbs...they are LED lights. Newer models have bulbs. If your fuse inside the drivers' side panel is ok, your lights probably have to be replaced if it's not in the wiring. I checked at the dealership today...a wonderful 258.00! So, to answer your question, mine doesn't have bulbs...
Change brake light bulbs Just remove the rear license plate. You can change the backup lights and brake light easily.
Check the bulbs, Check the fuse, Check the brake light switch, in that order.
Check fuse, check bulbs, check brake light switch, in that order.
AnswerThe bulbs for the brake lights are usually separate from the normal tail light bulbs. Check and replace the brake bulbs first, and if they are still not working examine the fuses, switch and wiring.
on some cars the tail lights and brake lights are totally different bulbs gain access to the bulbs and have someone push the brakes so that you can determine which bulbs are the brake lights and replace the tail lights
brake light switch, it is typically located above the brake pedal somewhere on the brake pedal arm
Check the brake light switch.
Check the fuse, check the bulbs and check the brake light switch, it should be one of those.
Check the bulbs,if not the bulbs you most likely have a bad ground.
its on different bulbs
Have you check all of the light bulbs? If yes, then check the ground next and then check the fuses. Lastly, if all of those check out, it is most likely the brake switch behind the brake pedal.
Start with checking the bulbs andthe fuse.
yes they have brake lights and you probably have a bad brake light switch which is on top of the brake pedal under the dash.
check wire continuity- no power no lights
Possibly a connection has fallen off, possibly the switch has failed.
#1 blown fuse #2 brake pedal switch #3 light bulbs and/or sockets