Fuses that "keep blowing when replaced" Fuses and Circuit Breakers are safety devices designed and installed in electrical circuits TO PROTECT the conductors [wires] from short circuits and overload conditions which can cause extreme overheating that can result in damage to the insulation and the conductors, and worse, the possibility of a FIRE which could destroy the vehicle. When a fuse, and replacement fuses blow, especially if it happens repeatedly, is an indicator of an UNSAFE CONDITION in that circuit, usually a short. Do not install a larger fuse in a misguided attempt to correct the problem. To install a larger fuse would almost guarantee damage to the wiring and an electrical system fire. The proper "fix" is for a qualified technician, who knows what he/she is doing, to troubleshoot the circuit, find and identify the defect, and make proper repair [s], BEFORE replacing the fuse again [with the properly sized fuse].
Ignition timing is automatically set. sorry.
To disarm the alarm on the 1998 Ford Contour, simply turn on the ignition using the vehicle's key. You can also disarm the alarm using the key fob.
No. The chipped ignition key did not start until the 1998 model year and was only on the 6 cylinder Contour and Mystique. (I've got a '97 6 cylinder Contour that seems to have a chip in the key.)
about 3800
How do you install a radiator in a 1998 ford contour?"
The keys on the 1998 Ford Contour are NOT chipped
where is egr valve on 1998 ford contour
how do I remove the key switch from a 1998 ford contour You have to remove the plastic trim around the steering column (behind the steering wheel). Put the key in the ignition cylinder and turn one click. There is a small hole on the side of the ignition cylinder, stick a small screwdriver into this hole and press hard. Pull out the ignition cylinder with the key.
The battery is the main power supply of the 1998 Ford contour.
yes it will fit
broken motor mount
I have a 1998 Ford Contour with 6 cylinders 2.5L and they are 32 mm.