answersLogoWhite

0


Best Answer
Copy

check your fuses.

2006-03-30 03:20:54
This answer is:
πŸ€“
🀯
πŸ€”
User Avatar

Your Answer

Loading...

Related Questions

What kind of brake fluid for a 1996 Dodge Avenger?

Dot 3


What does is mean when the brake light on a 1997 dodge avenger?

The red brake light on the dash means that the brake fluid is low or the parking brake is on.


Where is the Brake Shift interlock solenoid on a Dodge Avenger 2008?

It is inside the shifter assembly.


Where is the turn signal flasher located on a 1999 Dodge Avenger ES?

The 1999 Dodge Avenger signal flasher relay switch is located beneath the drivers side dashboard. The signal flasher relay switch will be between the gas pedal and the brake pedal.


How do you change the front brakes on a 2008 dodge avenger?

Remove the tire and wheel. Remove the spring from the brake shoe assembly. The brake shoe will come off. Reverse the process to install the new brake shoes.


What are some problems with a 1997 dodge avenger?

the automatic transmissions are hit or miss. most of them have problems eventually. The door Handles are known to brake.


How do you change the brakes on a 2001 Dodge Grand Caravan Sport?

i replace my rear brake shoes on 2001 dodge grand caravan and my emergency brake is still not working


How do you replace calipers on a dodge avenger?

remove the caliper slider bolts and the brake hose then put the new caliper on, dont forget to bleed the new caliper and top off brake fluid when finished


How do you change rear disc brakes on 98 avenger?

Begin by removing the tire and wheel from your 1998 Avenger. Remove the brake spring and the brake caliper. The brake pads will come off. Reverse the process to install your new brake pads.


How much does it cost to do a brake job on a 2008 dodge avenger?

DIY $48 FRONT ONLY (easy)... Dealer $260 all four with rotors $850 DIY about $225


Where is the brake light switch on a 1996 Avenger?

It is underneath the Brake Pedal.It's mounted to and right above the brake pedal.


Your 1996 dodge avenger brake lights stay on after the car is turned off what is the problem it is also cuasing the cruise control not to work?

Sounds like the brake light switch is broken or out of adjustment and yes it would cause the cruise control not to work.


Taillights not working on 1993 dodge Dakota but brake lights and turn signals do work what's the problem?

The bulbs should be checked on a 1993 Dodge Dakota if the taillights are not working. The plugs on the trailer package should also be checked to make sure that they are working.


What is the cause of a grinding noise coming from the rear endof a 1998 dodge avenger?

Sounds like you need a new set of brake pads and might have to get the rotors turned. Sounds like you need a new set of brake pads and might have to get the rotors turned.


What type of brake fluid for dodge neon?

A Dodge Neon use DOT3 brake fluid.


How do you change the tail light-brake light on a 1999 Dodge Avenger?

1999 Dodge Avenger brake light bulb lamp replacement procedure: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb lamp replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).


Where your brake sensor on 2001 dodge stratus?

the brake sensor for the 2001 dodge stratus is located on the inside of the car under the brake paddle.


How do you stop brake pulsation on 2001 dodge ram?

How do you stop brake pulsation on 1998 dodge ram


2002 Dodge Durango only third brake light works?

I would guess that both of your brake light bulbs are burned out, and only the high mount bulbs are still working.


Why will your 08 dodge avenger not go into gear once started?

Press the brake pedal for 2 seconds then pull lever in gear. If that does not work contact a dealer, many of the shifters have been damaged due to persons not pressing the brake pedal before trying to switch from Park.


Changing brake pads 2002 dodge pickup?

how do change brake pads on a 2002 dodge pickup 4x4


Emergency brake cable and 1987 Dodge Ram?

Yes a 1987 dodge ram has an e-brake cable


How do you replace the brake or turn signal bulb on a 2008 Dodge Avenger?

2008 Dodge Avenger turn signal and/or brake light bulb replacement: Purchase the correct replacement turn signal and/or brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the turn signal and/or brake light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).


Dodge Dakota brake lights?

dodge 2001 Dakota brake lights won't burn Check the fuses. If the fuses are okay check the brake light switch.


Dodge neon brake fluid?

dot 3 brake fulid