0
Why would the third brake light stay on an goes off when you open the door and the dome light comes on and back on when the dome light goes off?
Wiki User
∙ 7y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Why would rear parkers work but not brake lights?
first check brake light fuse second check light bulbs,they should be double element third check the brake light switch located on the brake pedal
Would the brake switch be two buttons that are released when the brake is pushed on a 1994 GMC jimmy?
Yes. One switch is for the left and right brake light assemblies; and, the other is for the 'third' brake light.
What is a CHMSL relay?
That would be the relay for the "Center High Mount Stop Light", AKA the third brake light.
What would cause the brake lights not to work when the third brake light and turn signals work and all fuses and bulbs are good on a 1995 buick riviera?
Your hazard/turn/cruise module in the steering column has failed. The third light still works because the third brake light switch is mechanical tied to the pedal.
What would cause the third brake light not to work but the other brake lights do in a 1994 s10 pickup?
a blown bulb or loose wire.
2002 Dodge Durango only third brake light works?
I would guess that both of your brake light bulbs are burned out, and only the high mount bulbs are still working.
How do you replace third brake light bulbs on a 1987 Monte Carlo?
I have an 87 Aero Coupe and my 3rd brake light bulb is in my truck. I think yours would be the same too.
Why would the third brake light work on a 1996 Chevy Monte Carlo but not the other two brake lights work?
this tells you is a simple wiring problem.most likely a loose wire from the third light to the other lights.(third lights provides the power to the other lights)
What fuse do you change on a 2008 Hyundai elantra if the rear brake lights and third rear brake lights do not work?
it would be the brake light switch about 20 dollars at autozone
What would cause the third brake light not to work on a 1999 Chevy Silverado?
There are a couple of reasons a 1999 Chevy Silverado third brake light will not work. The first may be that the light bulb is burnt out. If replacing the bulb does not work, there may be loose wires to the connection causing it to not work.
Wire a third brake light on a hot rod?
you have to pull the feed wire off the brake switch to supply power to the new third brake light. get a test light and test the wires on the brake switch....one is hot all the time the other one gets hot when you depress the pedal....that is the one you need. do not take it pull your power from the rear light it might have an intergrated turn signal wire. which would make your 3rd brake light blink.. ok.have fun! you have to pull the feed wire off the brake switch to supply power to the new third brake light. get a test light and test the wires on the brake switch....one is hot all the time the other one gets hot when you depress the pedal....that is the one you need. do not take it pull your power from the rear light it might have an intergrated turn signal wire. which would make your 3rd brake light blink.. ok.have fun!
Why 1998 Camry brake light comes on Fluid fine brakes fine it comes on and off usually when it is cold WHY?
I would check switches for faulty sensor on emergency brake...GOOD LUCK
