if front wheel drive check cv axles.
needs tires balenced or new shocks(struts)somtimes both
One possible answer: Loose bolts in combination with bad shocks or struts.
Most likely the shaking results from unbalanced tires. Get them checked ASAP. If that doesnt fix the problem, then it could be worn out shocks/struts.
Tire out of balance or a bent wheel. Also check the motor mounts; this model had problems with them.
Good question! The car wheels are out of alignment,or warped. or the tires are out of balance. The shocks or struts are worn out. There are other parts in the wheel mounting worn and can't maintain straight forward movements.
Yes if the shocks are bad it can allow a shake to happen It will also put a lot more stress on other things and cause them to wear out very fast Worn shocks can also allow tires to wear improperly so that they will shake also.
One reason that your truck might start to shake when the gas pedal is pressed is because the tires could need to be balanced. The problem could also be your shock absorbers, or struts. * It has less to do with the gas pedal as it has to do with parts affected by acceleration.
a bad bearing will cause it to shake, also a rotar or shocks will do the same.
One reason a cars front end may shake is bad struts. However, it can also be other things such as a bad tire or even if an alignment is needed.
Shocks and other suspension components (A-frame bushings, etc.) deserve a close inspection, and all connections (tie rods, etc.) should be checked.
Have you had the tires balanced and the wheels inspected for a bent wheel. Also have the tires themselves inspected for a defect. Can also be a worn CV joint or U-Joint in the drivetrain. Can also be a broken motor mount.
Make sure your rotor isn't warped and that your tires are properly balanced. Also look for a bent wheel or bad wheel bearing.