Want this question answered?
Central locking on madza 2 not working
central locking switch on the dash doesn`t work
Press the unlock button twice it's been set to unlock drivers first on +2004MY settings are on the central display menu
Try changing the fuse
i have a 1.4 Golf E 2002 plate. but my central locking has never worked or if i even have central locking even though it is stated on the vw site and numerous other sites. mine seems not to be working
i have a 1.4 golf E 2002 plate. but my central locking has never worked or if i even have central locking even though it is stated on the vw site and numerous other sites. mine seems not to be working
it should be in the same spot as the other fuses, but if u have a problem with your central locking you may just need to clean and lube the central locking units to get them working properly. My central locking on my 95 ef station wagon wouldn't work till i cleaned and used a bit of WD40 on the tail gate central locking unit and its been great ever since it should be in the same spot as the other fuses, but if u have a problem with your central locking you may just need to clean and lube the central locking units to get them working properly. My central locking on my 95 ef station wagon wouldn't work till i cleaned and used a bit of WD40 on the tail gate central locking unit and its been great ever since
i recently had same problem on fiat scudo there is a latch on drivers side it might be slightly worn i just changed it with other side its working fine now good luck
The actuator is faulty.
my remote central locking as just stoped working any ideas batt on key fob is new locked car up at night next morning just wont open got to use key
my remote central locking as just stoped working any ideas batt on key fob is new locked car up at night next morning just wont open got to use key
Have you checked the central locking fuse (should be in the car, not engine bay) that would be linked to the immobilizer but if the car starts while the Central locking doesn't then changing the fuse might solve the problem.