0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Will cylinder heads from a gm 350 fit on a Pontiac 400?
No.
What small block Chevy heads can you use on a305 4bbl Chevy motor?
305 heads of course, 350 heads will fit for sure and possibly 400. obviously no big block heads will fit. a 305 with 400 heads gets you a little over 352. 350 with 400 heads is a 383. add and divide
Will a Chevy 350 intake fit a Chevy 400 motor?
It depends on whether or not the intake ports match on the cylinder heads. You can get that info from one of parts exchange guides you may find online.
Does oil go to the heads in a 400 Pontiac motor?
Yes, it flows through the head to lubricate the valve train.
Can 400 heads work on 350?
yea its the same thing as putting a 350 head on a four hundered . the 400 heads just have seam holes that arent in a 350 scb
Are cylinder heads on a big block mopar interchangeable?
I know you can put 383 on a 440 and 400 on a 383 but i dont know about 440 on a 383 or 400 All Big Block Mopar B/RB Cylinder heads are interchangeable, there may be conflict with intake and exhaust manifolds on the 62'-65' max wedge heads, also the pre 64' closed chamber heads used a different rocker set-up than the later heads., You can still use them on a later motor just have to use the corresponding valve-train. Any 67' model and earlier head, is of a closed chamber design and will raise the compression of a 68' and later motor. Also, any pre 76' heads will have unhardened exhaust valve seats , which means they won't last long on today's unleaded gas unless you have hardened seats installed...
Will 350 heads fit a 400 block?
350 heads will bolt to the 400 block. They will need to be drilled for the "steam ports" in the 400 block.
Can you use 350 aluminum heads on a 400 motor?
Yes. For street use you should drill the steam holes using a head gasket as a template.
What type of Chevy Cylinder-Heads are 399899 1or y and 3873487 x?
Cast iron for a 307 or 350 unless they have 1.72" intake valves then its a 400 head
Which is the maximum speed of truck dodge 400 6cyl 137HP 1965?
The maximum speed of a 1965 Dodge truck with a 400 6 cylinder, 137 horse power motor is approximately 108 mph.
Where is 1 cylinder 1978 ford 400 motor?
if you stand in front of your truck, on the right hand side, closes to fan, remove your first spark plug, that's the #1 cylinder.AnswerThe above answer is incorrect unless you have a Chevrolet 400. The Ford 400 V8 number one cylinder is located passenger side, front of engine, not drivers side.
What is the difference between a Pontiac 400 and a Pontiac 455?
The Pontiac 400 has a bore of 4.12 and a stroke of 3.75. The Pontiac 455 has a bore of 4.15 and a stroke of 4.21. The 455 cylinder heads will have larger combustion chambers than the same year 400 heads to achieve comperable compression ratios on the larger engine. The blocks are physically the same size, but 455 has larger main bearings than the 400. 455=3.25 400=3.00, so crankshafts will not interchange. Cams,heads,intakes,exhaust,connecting rods,push rods,rocker arms...etc will all interchange.
