0
Yes it will assuming the 8th digit in each car's VIN are identical.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is the best kind of oil to use on a jeep grand Cherokee year 2000?
CASTROL 10W/40
What is the fuel pressure on a 1994 jeep grand cherokee laredo?
40 psi plus or minus 540 psi plus or minus 5
Would like to know the fuel pump psi recommendation for 93 Jeep Grand Cherokee Laredo?
40 psi plus or minus 5
What is the best type of muffler to put on a Jeep Grand Cherokee?
My two top picks would be 1: flowmaster 44's or 40's 2: glasspack
What is the engine coolant water mix for a 1996 Jeep Grand Cherokee Lerado?
50 50 coolant is what i use- would suggest no more han a 60 40 mix.
How do you remove stuck lugs on a 1999 grand Cherokee?
Try spraying them with WD-40 and let iot sit on there for a while. If that does not work try a 4 way lug wrench .
What could be causing the clicking noise in the motor of a 2004 Jeep Cherokee?
Have you changed your oil lately? You can try adding 10/40 wt. oil the next time you change oil.
Can i use 10 40 synthetic blend high mileage on 2011 jeep grand Cherokee 5.7 hemi?
No. A 2011 Hemi requires 5W20 for the multi displacement system to function properly.
What is proper oil pressure for 2001 jeep grand Cherokee with 4.0?
Minimum spec at a warm idle is about 12psi. Normal is about 30 at idle. Should go 40-60 at 3000 rpm.
What is the oil pressure for a 1993 jeep grand Cherokee?
Around 60-70 lbs cold, 35-40 lbs at normal operating temperture, and 15-30 lbs warm at idle.
Can a evolution motor fit the motor mount in a shovelhead frame?
I've never worked with a blockhead motor, but I'd think so, because as far as I know the only thing that's changed with Harley engines in the last 30-40 years is the top end.
Fan blower motor was intermittent now stopped completely on 2000 jeep Cherokee sport - any ideas how to fix?
you might try spraying WD-40 into the bearings of the fan and fan motor, and then spinning the motor by hand a few times. If this does work, you will have to add a regular lubricating oil to the places where you have sprayed the WD-40, as it will dry out fairly quickly. I would recommend using Gunk 'Super Oil'.
