Yes, a 9v 1100mA power adapter work with your 9v 500mA device. The mA number is the maximum amount of amperage that the adapter will produce without overloading itself. At 500 mA the adapter will only be working at half load.
No.If it is AC output, it will blow out the power circuits of the DC device.If it is DC output, it doesn't have enough current capacity for the load of the DC device.If you want to power a DC device with a wall wart, make sure the wart is:DC outputCorrect polarity (some have reversible polarity)Exact same voltage as the deviceGreater than or equal to current rating of the device
Using an undersized power supply is not a good idea. The device drawing 850 mA being connected to a 800 mA source will work but the adapter will get warm to hot over a period of time. This overloading of the power supply will eventually destroy the adapter.
Yes you can. But it may damage your computers power supply.
A device which requires 1000mA at 9 volts in order to operate will not work from an output of 500mA. This output is only half the power requirement of the device.
Yes, you can run a 4.3v device with a 5v power adapter as long as the amperage of the 4.3 volt device is under the amperage capacity of the 5 volt adapter.
No, the adapter's power output has to be equal to or greater that the current draw of the device.
A 12v AC adapter can be use to power devices that requires 12VDC and up to 500mA. It can also be use with electrical devices that require power but do not contain internal components to derive the required voltage and power from the main power.
You would overload and damage the device and/or the adapter.
You can use any 9v adapter as long as the output amperage is rated higher than the amperage rating of your appliance so yes a 600ma adapter can be used to power a 500ma or 400ma appliance
No, underpowering will not "power" the device, it will not run. You must get an adapter that is 6V and (2A or higher) will be ok as well.
A power adapter (sometimes also referred to as a power supply) is used to supply power to a range of devices. The power is taking from the mains electricity and transferred using the adapter to the device, such as a laptop.
Using a 12v 600ma source is allowing 12 volts and 600 amps of power. If the device requires a 12v 500ma source, the larger source is acceptable. Please note that it will only be drawing on 500ma of the available 600ma.