0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How can you stop a bath leak?
with A bath Will stop leaking. If you would simpoly place the plug in the plughole.
How do you find a water leak?
Water leaks can be tricky. If water is visible on a wall then it could be necessary to cut into the wall to find a leak. Listening in a very quiet house may allow you to hear a spraying leak. If a leak is suspected because of a high water bill, look at the water meter. The small dial moves when water runs. Shut off cut offs under the sinks and toilets and the water should stop running. Turn them on one at a time and watch until the meter tons again. There is your leak.
How do you stop leaking brake fluid?
Find the source of the leak. Most likely areas are a brake line at the wheels, or the master cylinder at the upper part of the firewall in the engine compartment.
How do you detect if it is a slab leak?
First, you need to determine if you have a leak anywhere in your home. Check to make sure that your faucets, toilets, showers, hoses, ice-makers etc are not using water. Once you have determined that nothing visible is leaking, look at the water meter. The leak Indicator is a small triangle or star on the face of the meter, and if it is moving, even slowly, you have a leak somewhere. If you turn of the shut-off valve (often near the ground in a closet or near the hot water heater) to close it, and the leak indicator stops, then the leak is on a supply line to a fixture in your home. The shut-off valve often appears to go nowhere. It comes out of the wall, an perhaps splits off prior to going straight back into the wall or slab floor. If the leak indicator does not stop when you close the shut-off valve, the leak is on the service line into your home, and may or may not be under your slab, but is definitely under the ground. Movement on the leak indicator usually means a good deal of water is leaking, and you should see water coming from a wall or perhaps out of the floor. If you have no visible water, and constant movement on the indicator, a slab leak is a good bet. A leak detection company can help you find it, and get it repaired. More information us available at our blog for slab leak detection. It has more information on how to find slab leaks, what are slab leaks, and how to pay for slab leaks.
Ihave a 1999 mercury sable what makes it cut off when you stop?
I have a 1998 Sable that has had the same problem. Every time it has been caused by a leak in a vacume tube. It has been replaced 3 times now on my car.
Is it a good idea to use oil stop leak additive to stop oil leak from intake manifold gasket?
I wouldn't recommend it. Replace the gasket.
How do you stop an oil leak?
Most stop leak additives do nothing but empty your wallet. Replace the gasket that is leaking.
Is there an easy fix for a small leak in the intake gasket for a 1995 range rover 4.0 se?
no, You will have to replace the intake gasket, CAUTION DO NOT USE STOP LEAK.
How do you stop a leak from the drain plug on a 97 accord LX automatic transmission?
Replace the gasket with a fiber gasket.
How do i stop 5.7 liter intake gasket leak?
You will have to remove the intake manifold and install a new intake gasket. You have no choice.
Will stop leak help your minor coolant leak from lower intake gasket 3.1?
Try Bars Stop Leak; its` worked wonders for some, none for others. Worth a shot though.
How do you stop oil leaking?
Most stop leak additives do nothing but empty your wallet. Replace the gasket that is leaking.
Is there a sealer to stop a leaking intake manifold gasket?
no, but you can replace the gasket entirely add the sealant ensuring a leak free fit.
How do you change oil pan gasket Honda Odyssey?
need to stop leak on 1995 Honda Odyssey on a oil pan gasket
Will stop leak really fix a head gasket?
No, it will not. That is used as an emergency repair. The only fix for a blown head gasket is to replace it.
How do I stop a thormostat Coolant Leak in a Ford Focus?
I don't know where the thermostat is physically located on a Focus specifically, but if it is underneath the water neck on top of the intake manifold it may be a poor sealant & gasket used when the water neck was mounted/installed. Perhaps you may want to refer to a Chilton's guide for the Ford Focus to replace the thermostat gasket and sealant?
What can you do to stop an oil leak?
There is only one way. Find the leak and repair whatever is causing the leak. Bad gasket, seal, or broken part, whatever.
