Yes, and vice versa. I bought a 97 aspire parts car and transferred the lights to my 95SE. No prob.
Derus
For the 1994 model (B3000), you can't change just the bulb. You have to change the headlight assembly.
It all depends on what make and model of car or truck. good Luck....
It depends completely on what year it is. If it is a composite style headlight (newer years), then the bulb should remove from the back of the assembly, while the assembly is left in the car. If it is an older year model, then the assembly is held in with two screws that can be reached from the front of the head light.
Try E-Bay or Craig's list. Also try antique car forums or Ford Model A Forums.
depends on with model,but generally pop hood look at back of headlight assembly, u should see thick wire harness going to the back of each headlight assembly,where it meets the assembly has a large round piece turn it and it should undo allowing access to the headlight bulb.Here's the best description that I've come across:http://www.ehow.com/how_4913243_replace-kia-sedona-headlight.html
I have a 2001 pre-model changeover which should be similar to 1999. I'm not sure if you mean replacing the headlight bulb but if that's the case you would pull out the round rubber grommet and that makes the bulb assembly accessible. You just unclip it, pull it out and replace the bulb...To change the headlight assembly (housing) there are 2 mounting bolts on top (covered)to remove, then pull out the assembly...
See "Related Questions" below for the 3 primary sets of instructions by model year groupings.
The headlamp bulb is removed from the rear of the headlight assembly. You have to remove the front bumber fascia to remove the headlamp assembly on this model. There is a plug that needs to be removed (twist one way, then pull) and the bulb should come out with it. Installation is reverse of removal. see the link below for more on removing te bumper to access the headlight.
It will vary depending on if you have the HID lighting system option or the Halogen lighting system option. See Sources & Related Links below for headlight bulb information.
That would depend upon your make and model. I know on my Nissan 240sx to actually disassemble the headlight itself, you have to remove the glue attaching the glass to the backing of the headlight. This is usually done by heating it up in some sort of oven. If your just looking to change a bulb, Google your make and model and you should find sufficient results.
since i have both,the answer is no.headlights are different,hood will probably be ok.
Yes it will if the 96 is a standard Mark Vlll, if the 96 is a LSC model it won't.