The 1991 and 1994 Ford Explorers only factory available engine was the 4.0 L OHV Checking www. motorcraft. com ( no spaces ) Both the 1991 and 1994 Ford Explorers , with 4X4 , list the same part number for an A4LD automatic transmission
The automatic transmission is an A4LD in a 1991 Ford Explorer
To bleed the hydraulic system for the clutch slave cylinder, there is a fitting on the drivers side of the transmission
From 1991 to 1995 the only engine available in the Ford Explorer was the 4.0 liter OHV ( over head valve ) V6 - six cylinder engine
Behind the engine, on the passenger side, just in front of the firewall.
The transmissions from 1991 - 1994 are the same. So the 1991 transmission will not fit a 1996 explorer.
Do I have to drop the maliford to take out the transmission?
The Ford Explorer was introduced in 1991. There are no 1990 Explorers to take a transmission from.
I dont see why not.
For a 1991 Ford Explorer , 4.0 litre V6 engine : ( 5W-30 ) * if you never drop below the freezing temperature then 10W-30 is fine
Should be a plug at the side of the transmission - fill to this level
The transmissions from 1991 - 1994 Ford Explorers are the same. So the 1995 transmission is different.
About 10 quarts