Want this question answered?
NO, They will not interchange.
the blazer or jimmy hub and bearing assembly should work on your 96 bravada they are basically similar vehicles
1993 was the first year the automatics used the electronic 4L60E transmission. Any 1993 - up Blazer/Bravada/Jimmy/S10/S15 automatic transmission should do.
An ERG is a unit of work. An EGR is a valve that usually sits on the manifold and is controlled by a vacuum diaphram.
is there heat to blow or does the blower not work chk thermostat or vacuumn at htr sw respectfully
Yes it will an Oldsmobile bravada rear end is 52 1/8 inches backing plate to backing plate a two wheel drive blazer or s10 rear end is 47 3/8 inches from backing plate to backing plate so depending on what wheels you want to run I put a bravada rearend in my s10 and I'm running a 15x8 weld prostars with a 5 1/2 inch back spacing but I think you can squeeze a 15x10 with a 6 1/2 inch or 7 1/2 inch back spacing also make sure you keep the wheel cylinders for the bravada as the s10 wheel cylinder won't work but the rest of the brakes will
No, the tranny has to be out of a olds, Pontiac, or Buick to bolt up to a Pontiac engine.
The shaft inside the trans will have to be changed it is longer in a 2 wheel drive and the taIL SHAFT.
they both have to be front or rear wheel drive, you cant do it if one is front, and the other is rear
Pretty sure 1994 - 2004 Chevrolet S series and GMC S series interchange.
Yes it will.
The fuse for the cluster may have popped. Please realize that the 1999 Blazer is a totally different Platform from the 2002 + TrailBlazer/Envoy/Bravada/Rendezvous/Saab97X GMT360 pl;atform trucks.