Yes, a catalytic converter can cause a vehicle to vibrate and stall. It will do this when it gets plugged because it causes the fuel mix to be disturbed.
A plugged catalytic converter would do that.
not running on all cylinders? check for spark and compression on all cylinders perhaps catalytic converter is plugged
The first thing I would check for this problem would be your motor mounts. A broken motor mount could allow the engine to twist and turn causing a vibrating sensation.
AnswerTurning on the air conditioner causes increased engine load. This load can trigger a faulty ignition part to cease operating, resulting in a misfire and vibration. If there is an internal problem with the catalytic converter or the heat shield is loose it will vibrate. Note that misfires greatly accelerate the death of a catalytic converter. More likely (if this is a GM truck) is bad valving internal to the Air Conditioning Compressor. It varies load so quickly that the belt tensioner shakes violently and that creates both a noise and a vibration.another answerIt could be the clutch on ur a/c that is rattling have it checked
warped break disk
Warped rotor. Remove and have it turned, or replaced.
Sounds like a bad engine mount. Steel against SteelIt will be hard to find, must look REAL......CLOSE
Make sure that the spark plug boots are firmly seated into the heat shields on the rear plugs. They can vibrate loose if not firmly seated.
Catalytic Converters get very hot, so there is a thin, sheet-metal heat-shield welded to the outside of the CC's housing to reduce chance of starting fires and transfering heat through the floor-board. The constant heating and cooling, expanding and contracting of the CC's housing causes fatigue at the welds and sometimes one will break. Engine and exhaust vibration cause the now unsupported corner of the heat shield to vibrate against the CC, causing a buzz, rattle, or hum.
inspect the upper motor mount
It has to vibrate.
vibrate is somthink