Yes the duel sump oil pan of the 302 will fit in your truck and will have extra clearance between crossmember and oil pan if needed
Build a scissor lift and attach to the bed and frame via crossmember. 12 volt dc pump and 3"X10" hydraulic cylinder.
follow the tbars toward the rear of the truck. you will see that they go into a set of "keys" located in the crossmember. the adjustment screws are those screws that go up into the crossmember and hit the tbar keys.
It is up in the drivers side frame rail, close to the transmission crossmember. You will have to lay up under the truck to see it.
it will fit but the crossmember may bolt up differently and the shifter may be in a slightly different location.
it's in the Chilton's manual for this truck.
Yes it is. You can find it up in the drivers side frame rail behind the cab and back by the transmission crossmember. You will have to lay down under the truck to see it.
the fuel filter is located inline on the inside of the left frame rale just ahead of the crossmember
hi there l have a 1989 mustang and mine is in the truck on the driver side behind the trunck liner so look there
It has 1, It is in the drivers side frame rail behind the cab, back were the transmission crossmember bolts to the frame. You will have to lay under the truck to see it.
It is up inside of the drivers side frame rail back were the transmission crossmember bolts to it. You will have to lay under the truck and look in the inside of frame rail.
It is up in the drivers side frame rail behind the drivers seat. It is close to the transmission crossmember where it bolts to the frame.You will have to lay up under the truck to see it.
It is in the drivers side frame rail just behind the cab. You will have to get under the truck and look up in the frame to see it. It's close to where the transmission crossmember bolts to the frame.