An SD Card will not work in a Compact Flash or Microdrive slot. You need to have an SD Card drive slot or a multi format memory reader which is compatible with SD Cards.
No, it will not. For sim cards you have to have special reader which is of the same form factor, and has appropriate voltages in order to read/write information.
Microdrive is a miniature 1" hard disk designed to fit in a CompactFlash (CF) Type II slot. In 2008 Hitachi and Seagate released 8GB versions. (See Wikipedia, "Microdrive")
No a type II card is twice as thick as a type I slot (but a type I card WILL fit in a type II slot)
Well if there is no slot in the computer for a sd card(small kind) or cf card (big kind), then you need a card reader, where you plug in the card and then from there it goes into computer via USB
this info is out of date but according to p477-478 of A+ Guide To Managing and Maintaining Your PC, Sixth Editionby Jean Andrews...the Microdrive CF comes in several sizes up to 4 GB while the Zip drive can hold up to 750 MB of data.
It means there is a problem with your Compact Flash card. It may need reformatting. It may not be in the slot properly. It may be damages or the contcts might be dirty.
A compact flash adapter is used to connect an SD card to a CF type slot. You can purchase this type of adapter from retailers such as Amazon and eBay.
You may want to do a search for the info, stay away from the wcf11. http://reviews.ebay.com/Which-CF-Wireless-Card-can-work-on-DELL-Axim-X5-X50-X51_W0QQugidZ10000000007633874
There are many purposes of a CF memory card. CF memory cards can be used for mass storage purposes. They are also used for camcorders and high definition cameras.
It is only on the 60 gb and 1st 80 gb models.
A CF card stands for compact flash, while a SD card stands for Secure Digital. An SD card has newer technology which allows it to be smaller, more portable, and contain more information.
It sounds like the camera may have a fault; do the cards work plugged into other devices (your computer or another camera)? Is there an error number/message associated with the error? no error number just a flashing light and cf card error in the frame camera will not allow me to go in setup or do anything.