yes
By adding more light bulbs
If you are looking to use the new energy efficient light bulbs on a light dimmer you will need to buy specially made dimmable CFLs. Not all energy efficient light bulbs are compatible with dimmers so be sure to check the packaging for information.
When two light bulbs are connected in series , there is voltage drop which causes the second lamp to dimAnswerWhen two lamps are connected in series, neither lamp will be subject to its rated voltage and, so, each lamp will be dim. Surprisingly, perhaps, the lamp with the higher power will be dimmer than the lamp with the lower power!
Over time, the heat produced causes the filament to grow thinner. This causes the light bulb to grow dim.
Connecting light bulb is equivalent to connecting a resistance. If you have connected light bulb, there will be some voltage drop across it and your TV may not get sufficient voltage. However if resistance is not big enough, than it wont have any effect.
When light bulbs are connected in series circuits, they will get dimmer whenever a bulb is added. This is because the current is shared between all of the bulbs equally.AnswerLamps only operate at their rated power when subjected to their rated voltage. If you connect lamps in series, each lamp will be subject to a lower voltage, so they will not operate at their rated power and, so, will be dimmer. The more powerful lamps will actually glow less than the less-powerful lamps because their resistance is lower and the voltage drop across them will also be lower than the voltage drop across the less powerful lamps.
If you are using what most of us think of as a normal light bulb, what is called an incandescent bulb, you do not need special bulbs. Any fluorescent light bulb, including the new curly bulbs called CFLs, requires a special ballast. The ballasts are built into the CFLs so you would need to buy bulbs specially labeled for dimmers. Never place a dimmer on a fan, or any motor, unless it is specifically labeled for use with a dimmer.
Use pink light bulbs they will make you look prettier. Use blue light bulbs to make soft light. If you have a lamp, drape a scarf over it to dim the light. Install a dimmer switch to adjust the lighting.
you can not put a normal dimmer on a florescent light. You need to install a dimmer made for flourecent lights and they are expensive about 50 dollar around here. If you want to dim it put a normal incandescent bulb in the fixture.
The dash light dimmer switch is turned off or broken.
Whether a spider light fixture can be dimmed depends on the specific design and the type of bulbs it uses. Here are the key factors to consider: Dimmable Bulbs: Spider lights that use dimmable bulbs can generally be dimmed. Check the product specifications or packaging to see if the bulbs are compatible with dimmer switches. Dimmer Switch Compatibility: Even if the bulbs are dimmable, the spider light fixture must be compatible with dimmer switches. Some fixtures may come with built-in dimming capabilities, while others may require the use of an external dimmer switch. Built-in Dimmer Functionality: Some spider light fixtures come with built-in dimming functionality. In such cases, you can usually control the brightness directly using a switch or a remote control that comes with the fixture. Dimmer Switch Installation: If your spider light is not dimmable by default, you can still install a dimmer switch on the wall. However, this depends on the type of bulbs used in the fixture. Not all types of bulbs are compatible with dimmer switches, so make sure to use dimmable bulbs. LED Compatibility: If your spider light uses LED bulbs, it's essential to use dimmable LED bulbs and ensure that the dimmer switch is compatible with LED lighting. Not all LED bulbs work well with all dimmer switches, so it's important to check for compatibility. Before attempting to dim a spider light or any other lighting fixture, it's crucial to read the product documentation, including the specifications for both the fixture and the bulbs. If you're unsure about compatibility or installation, it's advisable to consult with the manufacturer or a qualified electrician. Always follow safety guidelines and ensure that any electrical work is performed in accordance with local building codes. If your spider light is part of a larger lighting system or if you have specific product details, you may want to refer to the manufacturer's instructions for accurate information regarding dimming capabilities.
I have but if dimmer is on low the light fixture sometimes "hums", can be anoying It also shortens the bulb life, significantly in some cases. But their are also CFL bulbs built to be used with a dimmer switch that avoid these problems.Another AnswerYou should only use CFLs specifically-designed to be used with dimmers in circuits controlled by dimmer switches. There is a proven danger of fire hazard when ordinary CFLs are controlled by dimmer switches and, so, this should NEVER be done.