all external bolt on parts will work. heads, intake, dist, cam, pan, timing chain, oil pump etc. should all work as well. most internal parts will not work though. such as pistons crank rods and block.
The 305 crank will fit the 350, but will need to be balanced.
i would not use the 305 heads due to small compression chambers.
As long as the 350 block is under the year 1986. Then all of the external engine parts will interchange. The heads and intake will also interchange. The CRANK AND RODS AND PISTONS WILL NO INTERCHANGE.
none,they came with 305's
yes, a 305 and 350 utilize the same block
14093627 is listed on Mortec as an 87-94 305 block.
Yes they will, But you will have to drill the 4 center bolt holes out in the 88 intake to make it bolt up to the 305 heads. I don't no why anyone would want to put 305 heads on a 350 engine, The 350 will never run like it did before.
305 is the same distributor as a 350 will even fit some big block chevy's.
YOU CAN EITHER TELL BY THE HARMONIC BALANCER THE 350 IS THICKER THAN THE 305 OR YOU CAN TELL BY LOOKING ON THE BLOCK ON THE FRONT OF THE PASS SIDE HEAD THERE IS A FLAT SPOT ON THE BLOCK THERE SHOULD BE SOME NUMBERS AND LETTERS FIND THE LETTERS AND CALL A PARTS STORE
yes
Yes.
Yes their the same block....
the block & heads are the same you just have to pull the 305 out & put the 350 back in
Depending on equipment. Could have a 305 or 350 small block.