0
Will stud pattern pcd 4 x 114.3 offset 35 17 x 7 fit your 1988 mx6?
Wiki User
∙ 15y ago
Sorry to waste peoples time, I just realised that I have 5 stud, not 4 stud, so there is no way they would fit :(
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What is the stud pattern of a 94 Honda Accord?
The stud pattern (PCD) is 4x114.3 with +38 to +40 offset
What stud pattern is a Toyota caldina and offset?
5x114.4
What is the bolt pattern on a Corvette?
all corvettes run a 5x120.7 bolt pattern 68-82 used a 7/16 stud Low offset 84-89 12mm stud Med offset 90-current 12mm stud High offset
What is the wheel stud pattern for a Nissan Pulsar n16 2001?
Standard pulsar n16 alloy wheels are 14x6 with a 45+ offset with 4/114.3 stud pattern
Will BA rims fit AU?
Yes. BA wheel will fit an AU. All Falcons have the same stud pattern, just a different offset. 1967 XR - 1997 EL = 0 offset 1998 AU onwards = +35 offset
What is the bolt pattern and offset for the 1993 Toyota Supra?
The wheel bolt pattern for the 1993 Toyota Supra is 5 x 4.5 inches or 5 x 114.3 millimeters. The stud size is 12 x 1.5 and the offset is high positive.
What car uses a 5 x 5.5 bolt pattern?
There are a lot, assorted suv's dodge trucks/suvs Suzuki suv's Kia suv's other concerns are the stud size and the hub center bore size and offset. roadkillcustoms.com has a chart that will give you the yr/make/model/stud dia./ hub and offset.
Will a 5x100 stud pattern fit on a 5x120 stud pattern?
No
What is the lug pattern on a 1998 BMW z3?
The Lug Pattern on a Z3 96 - 02 is 5/120 OE Wheel 16/7 Offset H Stud size 12/1.5b ............max
Stud pattern for Mitsubishi lancer 1992?
1992 Mitsubish lancer wheel stud pattern?
Will 4 stud 15 alloys from a 1997 fiat brava fit on a 4 stud 1997 ford escort?
If the stud spacing, and offset is the same, then it will fit. Measure them both. Too stick the wheels on, not to sniff!
What is the stud PCD and offset of 2009 on Suzuki Alto aka Nissan Pixo wheels?
The stud pattern is how many bolts it has x the distance between two of the bolts across the face of the wheel. That would be on opposite sides, not the bolts that are next to each other. For example. A wheel with 4 studs that has a distance between bolts across the face of the wheel equal to 100mm would be a 4x100 pcd. To check the offset, you need to take off one of the wheels and look on the inside of the rim. There should be a small engraving telling you what the offset is.
