0
What else can I help you with?
Will a 4G63t head fit on a 4G63 block?
yes it will
Will the transmission of a 4G63 work on a 4G63T?
The transmission from a 4g63 will work on a4g63t whether it is standard or automatic however the standard transmission from the non-turbo engine will have a different final gear ratio than the turbo model. The automatic transmission from any model is essentially the same save the AWD model which has a secondary output shaft for the transfer case.
Would a 4g63T engine replace a 420A and work with the current transmission in a 96 Eclipse RS?
No, The 4G63 engine is turned around a 180 degrees compared to the 420A. It would take heavy modifications for it to work. The best thing to do is to rebuild your old motor and put a turbo on that! Just remember to get low compression ratio cylinder heads.
Would a 4g63t engine fit into a 1995 Hyundai Accent with current gearbox or a complete engine and gearbox swop?
You need to swap the engine and the tranny, use the mounts from the engine mounts from the accent, but the top mount has to come from an elantra 1.8L also, use the computer and wiring harness for the 4g63t. I put a 4g63 in a colt, basically the same car, goes like snot!
What kind of motor does a 1990 Plymouth laser has?
they can have the 2.0 DOHC 4g63 the 2.0 DOHC turbo 4g63t and they came with a 1.8 DOHC but I don't know the engine model. Just an FYI, the 1.8L motor in DSMs was a SOHC and had an engine code of 4G37. Cheers!
Can a non turbo head work on a turbo 4g63 engine?
Yes
How do you change the serpentine belt eclipse 4g63t?
the 4g63t does not have a serpentine belt, it has drive beltS
Will the transmission of a 4g63 work on a 420a?
no, the transmission for the 4g63 is on the passenger side, the 420a is on the driver's side. you will have 5 speeds in reverse and 1 speed in forward if you try this even with a transmission adaptor.
Where is the engine number located in the motor of a laser?
Behind the exaust manifold there is a machined flat plate that will have the numbers engraved on it. Since your asking about the Plymouth laser,due to the limited production years(given it is a DSM, 1990-94) the engine is most likely the 4G63 for non-turbo and 4G63T for turbo.
Can you change your 4g63 engine for 420a?
Are you talking about taking a 4g63 out and putting a 420a in? If so, i don't understand, why at all, you'd do that.
Can you swap 95 eclipse turbo engine in to 98 eclipse turbo?
yes. both engines are the 4g63. the turbo engines from the 1990-1994 is a 6 bolt 4g63 and the turbo engine from the 1995-1999 is a 7 bolt 4g63.
What engine does a 2008 lancer evolution ix have?
A 4g63t 2.0L mivec.
