Yes it will same from 83-92.
Open the hood to the engine compartment. Remove the headlight wiring harness. Remove the headlight assembly bolts. There are four headlight assembly bolts. The headlight assembly will come out.
# Open the hood. # Look directly above the headlight. # There are two black pull tabs, pull straight up on both. # The whole headlight assembly will come out.
No they will not the fenders and hood are different, the body styles were changed in 1988 IT will not work
1989 thru 92
hood - yes same all years 93-97 fenders - 93-97 same all years but one could have wheel moldings and one could not grille - different but will probably fit
The headlight adjusting screws are accessible from the rear of the headlight, you have to open the hood to access them.
Open the hood and then examine the top of the headlight assembly and locate the two pins that can be pulled up and out of the assembly. Then rotate the headlight Assembly out of the front of the grille and change the headlight bulb...reverse the process
open the hood. in back of headlight assembly there are two metal slides with pull tabs. pull them up then wiggle the headlight assembly. it should fall right out. with it out you can get at the bulbs.
First open the hood and locate the 5mm studs in front of the headlight you wish to replace. Remove the studs and gently pull out the headlight assembly. Remove the headlight assembly by twisting the connectors counter-clockwise. Remove the old bulbs from the assembly and replace with the new bulbs. Reconnect the assembly by attaching the connectors and twisting clockwise. Reinsert the assembly and and attach with the 5mm studs. Close the hood.
Open the hood, remove the two locks that hold the headlight assembly in place, with the two locks removed you can wiggle the headlight assembly out and gain access to the back side of the assembly to remove and replace the headlight bulb.
Stand in front of the headlight assembly, with the hood open, notice the two black locking tabs sticking up behind the headlight assembly, remove the two tabs by pulling on them straight up, this will release the headlight assembly and allow you to wiggle the assembly out to expose the bulb and connections.
Open the hood, stand in front of the effected headlight, notice the two tabs sticking up behind the radiator support in back of the headlight assembly. These tabs are locks that hold the headlight assembly in place. Lift the tabs up and remove them. Now you can wiggle the headlight assembly out the front and remove the bulb. Reverse for assembly.