answersLogoWhite

0


Best Answer

Well, I don't see that it would help it any! There are 2 keys for a reason! Why would you want to insert the door key in the ignition? It surely won't start the vehicle! Unless the ignition is already screwed up and can start with anything! The tumblers in the the locks for the ignition and doors are different! It would be like putting your house key in the car! Won't work!

User Avatar

Wiki User

โˆ™ 2006-05-19 03:14:35
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Add your answer:

Earn +20 pts
Q: Will trying to insert the door key into the ignition ruin the ignition if the ignition key has a chip?
Write your answer...
Submit
Sign up for more answers

Registered users can ask questions, leave comments, and earn points for submitting new answers.

Already have an account? Log in

Related questions

I do not have fob only a key how do i disarm the alarm when I open the door?

On a Chrysler vehicle with sentry key (chip key), you just have to put the key in the ignition and turn it on.On a Chrysler vehicle with sentry key (chip key), you just have to put the key in the ignition and turn it on.


Does the 2000 Dodge Neon have a chip ignition?

my 2001 neon has a chip keywell iahev a 2001 dodge neon and mine does have a chip ignition. you would have to go to the dealer to get it made. If you did get a copy of the key made anywhere else it would only work to open the door it wouldn't work to start the car.


Why do my key not work to start car but opens doors?

Many cars have a computer chip in the key - anti theft - it will work on the door and not the ignition.


Toyota Highlander remote programming?

# Start with the key out of the ignition. Open the driver door (all other doors are closed). Driver door is unlocked (other doors don't matter). # Perform these steps within 5 seconds ## Insert the key into the ignition (don't turn it) Pull key out ## Insert the key into the ignition (don't turn it) Pull key out # Perform these steps within 40 seconds ## Close, then open the drivers door. ## Close, then open the drivers door. ## Insert the key into the ignition (don't turn it) and pull it out. # Perform these steps within 40 seconds ## Close, then open the drivers door. ## Close, then open the drivers door. ## Insert the key into the ignition and leave in the ignition. ## Close the drivers doorTurn the ignition to ON (as far as you can go without cranking the engine), then back to off . ## Remove the key from the ignition. # Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point. # Perform these steps within 40 seconds ## Press the lock and unlock buttons on the transmitter simultaneously for 1.5 seconds ## Immediately after letting go of the lock and unlock buttons, press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock then unlock once indicating successful programming. If the door locks cycle twice, repeat steps 6a and 6b as the remote was not accepted. # Open drivers door


How do you program a Toyota Camry key fob?

To program a Toyota Camry key first open the driver's side door and close all other doors. Insert the key into the ignition two times within five seconds. Close than open the driver's side door. Put your key in ignition and pull it out quickly. Close driver's door and open it. Put the key back in the ignition, close the door and put the key to the "on" position. Remove from ignition than listen for the door locks to cycle.


How do you program a 2006 Toyota Sienna key with a transponder chip?

1. Start with the key out of the ignition, drivers door is open all others closed and drivers door is unlocked. 2. Perform these steps within 5 seconds. A. Insert the key into the ignition(Do NOT Turn) Pull key out. B. Insert the key into the ignition(Do NOT Turn) Pull key out. 3. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition(Do NOT Turn) Pull key out. 4. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into ignition and leave it in ignition. D. Close the drivers door. E. Turn the ignition to ON (Do NOT Start) then back to OFF. F. Remove the key from the ignition. 5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point. 6. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted. C. Repeat steps A and B in step 6 for each new remote. 7. Open drivers door. The above is how you program the remote not the key.


How do you program a Pontiac Vibe keyless entry remote?

Start by:Remove the key from the ignitionClose all the doorsLock all the doorsUnlock the driver's doorOpen the driver's doorPerform these steps within 5 seconds:Insert the key into the ignition (do not turn)Remove keyInsert the key into the ignition (do not turn)Remove keyPerform these steps within 40 seconds:Close then open the driver's doorClose then open the driver's doorInsert the key into the ignition (do not turn)Remove keyPerform these steps within 40 seconds:Close then open the driver's doorClose then open the driver's doorInsert the key into the ignition and leave itClose the driver's doorTurn the ignition to ON (do not start)Turn the ignition to OFFRemove the keyWithin 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Restart completely if the locks do not cycle at this point.Perform these steps within 40 seconds:Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds then release both buttons.Immediately press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat this section.Repeat this section as needed for each new remote.Open driver's door


How do you program the remote for a 98 Volkswagen Passat?

turn ignition on then after 30 seconds insert additional key into door lock. Push key lock or unlock button and a few seconds, repeat. Turn off ignition.


How do you Program A New Keyless Entry Remote Toyota?

To program a new keyless entry remote Toyota, first insert the key into the ignition and remove twice in 5 seconds. Second, close and open driver door twice in 40 seconds. Third, insert the key and remove it again from the ignition. Then close and open driver door twice in 40 seconds. Programming is now complete.


How do you program a keyless remote for 2007 Toyota Solara trunk?

. Start with the key out of the ignition, drivers door is open all others closed anddrivers door is unlocked.2. Perform these steps within 5 seconds.A. Insert the key into the ignition(Do NOT Turn) Pull key out.B. Insert the key into the ignition(Do NOT Turn) Pull key out.3. Perform these steps within 40 seconds.A. Close then open the drivers door.B. Close then open the drivers door.C. Insert the key into the ignition(Do NOT Turn) Pull key out.4. Perform these steps within 40 seconds.A. Close then open the drivers door.B. Close then open the drivers door.C. Insert the key into ignition and leave it in ignition.D. Close the drivers door.E. Turn the ignition to ON (Do NOT Start) then back to OFF.F. Remove the key from the ignition.5. Within 3 seconds, the power door locks should lock then unlock automaticallyindicating successful entry into programming mode.Return to step 1 if the locks do not cycle at this point.6. Perform these steps within 40 seconds.A. Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds.B. Immediately after letting go of the lock and unlock buttons,Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the doorlocks should lock and then unlock once indicating successful programming. Ifthe door locks cycle twice, repeat steps A and B in step 6 as the remote wasnot accepted.C. Repeat steps A and B in step 6 for each new remote.7. Open drivers door.


How to program a 2005 rav4 keyless remote?

1. Start with the key out of the ignition, drivers door is open all others closed anddrivers door is unlocked.2. Perform these steps within 5 seconds.A. Insert the key into the ignition(Do NOT Turn) Pull key out.B. Insert the key into the ignition(Do NOT Turn) Pull key out.3. Perform these steps within 40 seconds.A. Close then open the drivers door.B. Close then open the drivers door.C. Insert the key into the ignition(Do NOT Turn) Pull key out.4. Perform these steps within 40 seconds.A. Close then open the drivers door.B. Close then open the drivers door.C. Insert the key into ignition and leave it in ignition.D. Close the drivers door.E. Turn the ignition to ON (Do NOT Start) then back to OFF.F. Remove the key from the ignition.5. Within 3 seconds, the power door locks should lock then unlock automaticallyindicating successful entry into programming mode.Return to step 1 if the locks do not cycle at this point.6. Perform these steps within 40 seconds.A. Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds.B. Immediately after letting go of the lock and unlock buttons,Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the doorlocks should lock and then unlock once indicating successful programming. Ifthe door locks cycle twice, repeat steps A and B in step 6 as the remote wasnot accepted.C. Repeat steps A and B in step 6 for each new remote.7. Open drivers door.


How do you program a remote for a 06 corolla?

1. Start with the key out of the ignition, drivers door is open all others closed anddrivers door is unlocked.2. Perform these steps within 5 seconds.A. Insert the key into the ignition(Do NOT Turn) Pull key out.B. Insert the key into the ignition(Do NOT Turn) Pull key out.3. Perform these steps within 40 seconds.A. Close then open the drivers door.B. Close then open the drivers door.C. Insert the key into the ignition(Do NOT Turn) Pull key out.4. Perform these steps within 40 seconds.A. Close then open the drivers door.B. Close then open the drivers door.C. Insert the key into ignition and leave it in ignition.D. Close the drivers door.E. Turn the ignition to ON (Do NOT Start) then back to OFF.F. Remove the key from the ignition.5. Within 3 seconds, the power door locks should lock then unlock automaticallyindicating successful entry into programming mode.Return to step 1 if the locks do not cycle at this point.6. Perform these steps within 40 seconds.A. Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds.B. Immediately after letting go of the lock and unlock buttons,Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the doorlocks should lock and then unlock once indicating successful programming. Ifthe door locks cycle twice, repeat steps A and B in step 6 as the remote wasnot accepted.C. Repeat steps A and B in step 6 for each new remote.7. Open drivers door.


How do you program a keyless remote for a 2005 Toyota Camry?

This works on 2004 Toyota Camry as well. Start with the key out of the ignition. Open the driver door (all other doors are closed). Driver door is unlocked (other doors don't matter). Perform these steps within 5 seconds Insert the key into the ignition (don't turn it) Pull key out Insert the key into the ignition (don't turn it) Pull key out Perform these steps within 40 seconds Close, then open the drivers door. Close, then open the drivers door. Insert the key into the ignition (don't turn it) and pull it out. Perform these steps within 40 seconds Close, then open the drivers door. Close, then open the drivers door. Insert the key into the ignition and leave in the ignition. Close the drivers door Turn the ignition to ON (as far as you can go without cranking the engine), then back to off . Remove the key from the ignition. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point. Perform these steps within 40 seconds Press the lock and unlock buttons on the transmitter simultaneously for 1.5 seconds Immediately after letting go of the lock and unlock buttons, press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock then unlock once indicating successful programming. If the door locks cycle twice, repeat steps 6a and 6b as the remote was not accepted. Open drivers door


How do you program a 2006 solara key?

. Start with the key out of the ignition, drivers door is open all others closed anddrivers door is unlocked.2. Perform these steps within 5 seconds.A. Insert the key into the ignition(Do NOT Turn) Pull key out.B. Insert the key into the ignition(Do NOT Turn) Pull key out.3. Perform these steps within 40 seconds.A. Close then open the drivers door.B. Close then open the drivers door.C. Insert the key into the ignition(Do NOT Turn) Pull key out.4. Perform these steps within 40 seconds.A. Close then open the drivers door.B. Close then open the drivers door.C. Insert the key into ignition and leave it in ignition.D. Close the drivers door.E. Turn the ignition to ON (Do NOT Start) then back to OFF.F. Remove the key from the ignition.5. Within 3 seconds, the power door locks should lock then unlock automaticallyindicating successful entry into programming mode.Return to step 1 if the locks do not cycle at this point.6. Perform these steps within 40 seconds.A. Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds.B. Immediately after letting go of the lock and unlock buttons,Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the doorlocks should lock and then unlock once indicating successful programming. Ifthe door locks cycle twice, repeat steps A and B in step 6 as the remote wasnot accepted.C. Repeat steps A and B in step 6 for each new remote.7. Open drivers door.


How do you program key fob for 2002 Toyota Tundra?

1. Start with the key out of the ignition, drivers door is open all others closed and drivers door is unlocked. 2. Perform these steps within 5 seconds. A. Insert the key into the ignition(Do NOT Turn) Pull key out. B. Insert the key into the ignition(Do NOT Turn) Pull key out. 3. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition(Do NOT Turn) Pull key out. 4. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into ignition and leave it in ignition. D. Close the drivers door. E. Turn the ignition to ON (Do NOT Start) then back to OFF. F. Remove the key from the ignition. 5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point. 6. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted. C. Repeat steps A and B in step 6 for each new remote. 7. Open drivers door.


How do you program the remote for 2007 corolla?

1. Start with the key out of the ignition, drivers door is open all others closed anddrivers door is unlocked.2. Perform these steps within 5 seconds.A. Insert the key into the ignition(Do NOT Turn) Pull key out.B. Insert the key into the ignition(Do NOT Turn) Pull key out.3. Perform these steps within 40 seconds.A. Close then open the drivers door.B. Close then open the drivers door.C. Insert the key into the ignition(Do NOT Turn) Pull key out.4. Perform these steps within 40 seconds.A. Close then open the drivers door.B. Close then open the drivers door.C. Insert the key into ignition and leave it in ignition.D. Close the drivers door.E. Turn the ignition to ON (Do NOT Start) then back to OFF.F. Remove the key from the ignition.5. Within 3 seconds, the power door locks should lock then unlock automaticallyindicating successful entry into programming mode.Return to step 1 if the locks do not cycle at this point.6. Perform these steps within 40 seconds.A. Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds.B. Immediately after letting go of the lock and unlock buttons,Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the doorlocks should lock and then unlock once indicating successful programming. Ifthe door locks cycle twice, repeat steps A and B in step 6 as the remote wasnot accepted.C. Repeat steps A and B in step 6 for each new remote.7. Open drivers door.


How do you reprogram keyless remote 06toy sienna?

1. Start with the key out of the ignition, drivers door is open all others closed anddrivers door is unlocked.2. Perform these steps within 5 seconds.A. Insert the key into the ignition (DO NOT Turn) Pull key out.B. Insert the key into the ignition (Do NOT Turn) Pull key out.3. Perform these steps within 40 seconds.A. Close then open the drivers door.B. Close then open the drivers door.C. Insert the key into the ignition(Do NOT Turn) Pull key out.4. Perform these steps within 40 seconds.A. Close then open the drivers door.B. Close then open the drivers door.C. Insert the key into ignition and leave it in ignition.D. Close the drivers door.E. Turn the ignition to ON (Do NOT Start) then back to OFF.F. Remove the key from the ignition.5. Within 3 seconds, the power door locks should lock then unlock automaticallyindicating successful entry into programming mode.Return to step 1 if the locks do not cycle at this point.6. Perform these steps within 40 seconds.A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds.B. Immediately after letting go of the lock and unlock buttons,Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the doorlocks should lock and then unlock once indicating successful programming. Ifthe door locks cycle twice, repeat steps A and B in step 6 as the remote wasnot accepted.C. Repeat steps A and B in step 6 for each new remote.7. Open drivers door.


How do you program a new key fob for 2003 Buick Rendezvous?

1. Close all doors.2. Press and hold the Unlock button on door lock switch on drivers door.Hold until instructed to release.3. Insert and remove key from ignition 2 times. Do Not turn ignition.4. Insert key in ignition a third time and leave key in ignition. Do Not turn ignition.5. Release door lock switch on drivers door panel.A Chime will sound 3 times indicating that you are in programming mode.6. Press both the Lock and Unlock buttons on the remote up to 30 seconds.A chime will sound 2 times if remote has programmed successful.7. Repeat step 6 if you are programming additional remotes.8. Remove key from ignition to exit programming mode.


How do you turn off the alarm without the remote?

Unlock the drivers door with the key or insert the key into the ignition switch and turn the switch to the on position will turn off the alarm.


How do you program a 2002 Toyota Tundra remote?

1. Hold the key in your hand, drivers door is open all others closed and drivers door is unlocked. 2. Complete these steps within 5 seconds. A. Insert the key into the ignition(Do NOT Turn) Pull key out. B. Insert the key into the ignition(Do NOT Turn) Pull key out. 3. Complete these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition(Do NOT Turn) Pull key out. 4. Complete these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into ignition and leave it in ignition. D. Close the drivers door. E. Turn the ignition to ON (Do NOT Start) then back to OFF. F. Remove the key from the ignition. 5. In less then 4 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point. 6. Complete these steps within 40 seconds. A. Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted. C. Repeat steps A and B in step 6 for each new remote. 7. Open drivers door.


Are the door and ignition keys the same on a 1963 Chevrolet impala?

Yes. If you have one with no keys, simply remove the passenger side door lock and take it to your local locksmith who can make a key from the 4 digit code stamped into it, for less than $25. That, or risk destroying the ignition switch trying to get it out of the dash with no key. Door lock easy, dash ignition switch with no key--very difficult.


How do you program 2006 Toyota Camry keyless remote?

2006ToyotaKeyless Entry Programming Instructions 1. Start with the key out of the ignition, drivers door is open all others closed anddrivers door is unlocked. 2. Perform these steps within 5 seconds.A. Insert the key into the ignition (Do NOT Turn) Pull key out.B. Insert the key into the ignition (Do NOT Turn) Pull key out. 3. Perform these steps within 40 seconds.A. Close then open the drivers door.B. Close then open the drivers door.C. Insert the key into the ignition (Do NOT Turn) Pull key out. 4. Perform these steps within 40 seconds.A. Close then open the drivers door.B. Close then open the drivers door.C. Insert the key into ignition and leave it in ignition.D. Close the driver's door.E. Turn the ignition to ON (Do NOT Start) then back to OFF.F. Remove the key from the ignition. 5. Within 3 seconds, the power door locks should lock then unlock automaticallyindicating successful entry into programming mode.Return to step 1 if the locks do not cycle at this point.6. Perform these steps within 40 seconds.A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds.B. Immediately after letting go of the lock and unlock buttons,Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the doorlocks should lock and then unlock once indicating successful programming. Ifthe door locks cycle twice, repeat steps A and B in step 6 as the remote wasnot accepted.C. Repeat steps A and B in step 6 for each new remote.7. Open drive's door.


Do the keys that open the doors on a escort gt work in the ignition?

Yes, originally the door and ignition keys are the same. but if you have to replace your ignition / steering column, you will have a different (re-keyed) key for the door and for the ignition.


How do you program a 1999 Infiniti Q20 remote?

open l/f door. get in and close door. insert and remove key slowly until hazards flash. then turn ignition "on" but don't start car. then press the lock button on the remote.


Every time i open the drivers door a buzzard goes on?

Wow a live in Buzzard The buzzer is trying to tell you the key is in the ignition or the head lights are on.