as in ive broken the key and missed placed the plastic end of it, i still have the metal part but not the immobilizer end. so it will turn over each time you turn the key but it wont start or even continue to keep turning over till started just turns once on each key turn. so i thought maybe a different motor might bypass this as i cant afford to buy a new key, and i have a spare motor. its a vt commodore.
g bhai mujhe original casing chaiy n81 ki
You can change immobilizer system in your vehicle easily with the proper guidance. You need to ensure that you have the right component parts and follow the right procedure. If you are not sure, you might as well employ the services of a professional.
To change the garage door light bulb you need to remove the protective casing. Once you have removed the positive casing, you can replace it with a new one.
yes very easy
You cant, they are factory sealed, what you can do is use a dremel dril and cout open the casing, but i dont recomend that, i did it on mine, and put hid conversion kit, came out well. EZLNH8U
To change the front head light you need to unscrew the screws to remove the protective casing. Once the protective casing has been removed the front head light bulb can be replaced with a new one.
Follow link. http://www.southwestcruisin.co.uk/forum/viewtopic.php?t=15593
Trunk open, remove the 4 wing nuts on the casing. The casing will pull off from the outside. The bulbs are in there.
To change the front head light you need to unscrew the screws to remove the protective casing. Once the protective casing has been removed the front head light bulb can be replaced with a new one.
The head light bulb casing un-screws, like a half turn then just pops out. The bulb is inside that casing.
You just have to unscrew the light casing with a regular Phillips screw driver. the casing will come right out and you can put in the new bulb.
02 sensor heater curcuit malfunction (bank 1 sensor1)---change front 02 sensor if need be.