Xbox 360 mic wont work

Answer 1

1. Remove the foam cover from the ear piece.

2.Carefully press in the tabs with the screwdriver tip to release the cover. 3.Pull the speaker out from its compartment.

4.Examine the speaker to see if any wires have fallen off.

5.take the broken wire and place it on its terminal on the speaker.

6.Use the soldering gun to solder the wire back in place. Allow it to cool completely before touching it. 7.Set the speaker back in its housing and snap the speaker cover back in place.

8.Re- install the foam pad over the ear-piece. Be careful when doing this because the foam can tear easily.

9.Plug the Xbox 360 headset into the controller and fire up your favorite game. You should now be back in action.

Answer 2

1- Check the A/V cable connections and make sure that the terminals are in good shape.

2-Check your TV and make sure that the sound is not muted or low.

3- Last trial is to check yr hardware sound card and that needs a trained technician to inspect your motherboard.

Answer 3

If you hear through your microphone then your system probably needs service.

Answer 4

Check if the talk tab is green if it is then try this Guide button>settings>preferences>voice and check if mute is on

Answer 5

its probably broken.

Answer 6

bum