0
You filled your pool pump with water now it still doesnt work what can you check for next?
Wiki User
∙ 15y ago
If it worked before and the leaf basket is not blocking things up and the pump motor seems to be working you may have to see if there is not something wrong with the impeller against the pump.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What is filled with holes but still holds water?
A sponge
Are dams fresh water filled or salty water filled?
Fresh water filled.
How many of these 16 compartments could be filled with water and the titanic still stay afloat?
Only four
The blower works on peugeot 406 1.9td but it only blows cold air doesnt get warm or hot?
check water in the water tank and fill it up.
I Filled my empty oil tank today and still no heat or hot water why?
Reset on the furnace or breaker tripped?
What is a water filled castle defence?
a moat that is a wide ditch filled with water
If a snail laid eggs on the side of the tank the tank was then filled with water the eggs are still attached to the tank will the water affect the eggs and how long will it take for them to hatch?
the water won't affect the eggs and they still have plenty of time to hatch
You have change your thermostat radiator and cap but water does not seem to circulate right your 2000 Dodge Intrepid still overheats what can be the problem sorry I changed the water pump as well.?
Check that the coolant fans are still working, then check out the water pump.
Can 2 liter soda bottles be filled with water frozen and be used as cooling wand for sauces?
Yes, two litter bottles can be filled with water and frozen. The frozen water can then be put into sauces to help cool them down. Always make sure to check for any plastic that may be from the bottles.
project report on Checking the bacterial contamination in drinking water by sulphide ion?
To check for sulbe tested is filled sulphide ion contamination of drinking water, the water to be tested is filled in a bottle with a H2S strip. This sample is put in an incubator for 16 hours. If the test strip comes back black, the water is not fit for consumption.
What is an aqua level?
A tube with water in it. Since water seeks it's own level, any body of water that is connected will be at the same level. You can use a hose filled with water and check the level around a house from one point.
How do you start a motor that hasn't ran for two years?
I would suggest with the key.If that doesnt work then you will have to provide more information, like does it turn over? is the battery dead? is there oil? water?If it doesnt start then the question you should be asking is WHY doesnt my engine start, and then provide some information for us to go onAnswer 2Before attempting to start it, remove the spark plugs (assuming its a petrol engine), pour a teaspoon of engine oil into each bore.Turn the engine over for a couple of seconds, with the plugs still out.This will check that the bores are not rusted, or filled with water and also provide a good seal at the piston rings. Also it will confirm that the engine hasn't seized and the bearings are all OK.Now put the plugs back in and try for a start.
