You unhook the connection from the cable box to the TV and connect it to the VCR input. You purchase a short cable and install it from the VCR output to where the cable was connected to the TV. The TV will get the cable box signal through the VCR with no problem when you are not using the VCR. If the cable box was connected to the surround sound or Home Theater and then the TV then connect the cable box to the VCR and then the surround sound or home theater.
Two equipments of the same type - two computers, two routers, two switches - should be connected with a crossover cable.
Just plug the cable in. An icon should appear in the top right corner, indicating it is connected. Provided your router is connected to the internet, you should have internet access automatically.
You purchase a router and connect it to the cable modem and then connect everything to the router. Otherwise you have to unplug whatever is connected to the cable modem (for example a PC) and plug in the PS3 . Whatever you have unplugged is no longer connected to the internet until you unplug the PS3 and plug it back into the modem. Once the PS3 is connected to the cable you need to go to network settings on the PS3 and set up the network connection.
Batteries vent Hydrogen gas. You should always connect the positive battery cable first to avoid a spark at the battery that could cause the Hydrogen to explode. The negative cable should never be connected to the battery negative post. It should be connected to another ground area on the engine.
The negative battery lead cable is to be connected to the negative lead terminal on the battery.
You do not have to connect your router to your PC via ethernet cable, you can instead connect via wi-fi and your router must be connected to your hub.
To connect a PC to a switch you should use a straight through UTP cable.
You will need an ethernet cable if you cannot connect through wireless or do not have a wirless card.
Yes, the PS3 can be connected via an ethernet cable directly to the router or modem.
by plugging the white wire with the usb cable to the usb cable slot. Then you plug the other side of the white wire into your ipod then it should say connected on the screen
Connect the negative cable first.
No, you do not need to use a firewire cable. A lot of printers can now be connected wirelessly.