Vacuum leaks at the intake manifold gaskets, which causes the vehicle to run lean and cause the check engine light to come on. This is usually caused by a poorly designed baffle in the front valve cover that allows oil past into the PCV system ,and into the intake manifold which softens the gaskets and makes them leak. There is a redesigned valve cover to correct this. Raise the hood and see if the front valve cover is black(origional problem cover). If it has been changed to the new design valve cover, which is an unpainted aluminum cover(new design), then the intake gaskets may have already been replaced as well.
I recently replaced the battery in our 1998 Windstar and did not keep the electrical system connected during the changeover. No issues afterwards.
Take itinto the store where you bought it. Or just buy a new printer.
If you are having any heating or a/c issues in your Windstar, be sure to check your blend door for functionality FIRST. The most common issue with heat or A/C in the late model Ford windstar is a broken blend door. A broken blend door actuator is almost as common as a broken blend door itself. Typically, the fix requires disassembling the entire dash and replacing the whole plenum box, which can be a costly repair.
I bought one new in 1997 it's a 1998 model and i love it. no major issues
If you are having heater/air conditioning issues in your Ford Windstar, the first thing to check should be the blend door. Broken blend doors are the main cause of heating issues in this vehicle. The Blend Door actuator on the Ford Windstar can be found by removing the glovebox. A broken blend door actuator is almost as common as a broken blend door itself. Typically, the fix requires disassembling the entire dash and replacing the whole plenum box, which can be a costly repair. Linked here is a video from www.heatertreater.net demonstrating how to access components of the plenum box for repair without disassembling the entire dash
I bought a running one in North Idaho for $50. It has a couple issues, but works.
If you bought it new from a dealer take it back to the dealer or your warranty will be void if you mess with it.
Yes they are crap. I bought mine 3 months ago and it has already broken down twice
RMA means Return Merchandise Authorization. As if you bought something and had to return it under warranty. The seller issues and RMA usually as a number such as RMA1234.
A T150 is a top loader, so cannot be a linkage problem, but could be a clutch linkage problem. You didn't say if it ground gears, or was just tough to pull into gear. Anyway, check clutch adjustment.
There are not much but some sound quality issues are found in Sony Video Cameras. Therefore, Sony video cameras should be bought from a reputable store and warranty card should also be obtained.
RMA means Return Merchandise Authorization. As if you bought something and had to return it under warranty. The seller issues and RMA usually as a number such as RMA1234.