Check t he wiring and connections for problems.
Where is the camshaft sensor located in 1997 Chevy venture
not worth changing the crankshaft, better to swap the engine with new or used engine, now if it is the camshaft that is more cost effective.
Yea, the crankshaft sensor is under the distributor and the camshaft sensor is inside the distributor, you cannot change it so you will have to replace the whole distributor.
Does the 1991 2.5 s10 have a timing chain or a belt or just mesh gears and how do you replace them The camshaft is gear driven off the crankshaft. The camshaft gear is pressed onto the camshaft. The camshaft must be removed from the engine to change the camshaft timing gear. The timing gears should last the life of the engine. Next time, please don't answer your question with another question.
The water pump on that neon is located in the distribution belt with between the camshaft and crankshaft pulley, you have to change also the belt, the problem with that is that it is really difficult to remove the crankshaft pulley, you need a very special extractor for that. Removing the water pump is really easy.
Correctly locate the timing pin and then ensure that the camshaft sprocket is locked with the bolt. The camshaft sprocket bolts are then slacken and then you fully turn the camshaft sprocket clockwise in the slotted holes. Slacken the bolts in the injection pump and you fully turn the injection pump sprocket clockwise without resistance. Finally you fit the belt in the crankshaft sprocket.
how to change camshaft oil seal 95 pathfinder
The Camshaft and crankshaft sensors sit behind the main pully, you really need a mechanic to change this because if you don't torque it right they will shift and you will have to replace them again. The parts are only about $40 a piece but the labor will run you about 2-$300.
on the 1998 the camshaft sensor is in the distributor ,you have to change it....you have to change the whole distributor..the sensor is integrated. the crankshaft sensor is located on the block under the cruise control actuator
is it possible to change the language of land cruiser 2013 navigation system
try to replace the camshaft position sensor located under the power steering resivoir .. on 4.6 liter lincoln ...
how to change ac filter for land cruiser 2001