answersLogoWhite

0


Best Answer

Check the fuses aren't burnt first. Then remove lense and check bulb filaments if fine. Try your emergency flashers to see if they blink, if not THEN replace the flasher unit at the fuse box...easy to replace. Hope this helps.

User Avatar

Wiki User

โˆ™ 2006-04-11 06:11:31
This answer is:
User Avatar
Study guides

Add your answer:

Earn +20 pts
Q: Your 1976 blazer k5 blinkers dont work new flasher FLASHERS WORK STILL NO BLILKERS?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Are there two flasher relays for a 1996 blazer?

Yep, one for the signals and one for the emergency flashers.


Why do your blinkers stay on and don't blink on your 1997 blazer?

Possibly a defective Flasher Relay. Replace the relay.


How do you get your blinkers to work on an 1991 Chevy Blazer?

If the fuse is good and the bulbs are good, replace the flasher relay.


WHY WON'T THE Turn signals work but flashers do for a 1997 Chevy blazer?

Aren't they different flasher relays


Both Blinkers and emergency flashers not working 95 blazer?

You may want to check the brake lights.Everything runs through the multi-function switch.(the turn signal switch)


Where is the flasher located on a 2004 dodge Dakota 2wd?

The flashers are located on the top of the steering wheel like they would be in a 2005 Chevy trail blazer.


Where is the flasher on a 1997 blazer?

The signal flasher and the 4-way flasher are both located behind the plastic lower dash panel, aprox above the trans hump in floor. The plastic lower dash panel must be removed to gain access to the flashers.


Where is the hazard light flasher on a 1997 Chevy blazer s10?

The hazard and signal flashers are located behind the plastic lower dash panel, aprox under the radio. The lower dash panel must be removed to gain access to the flashers.


How do you check if the flasher is blown on 96 blazer?

There are two flasher relays side by side. One is for the signal lights, the other is for the emergency flashers. They are the same relay so you can swap the two and see if the problem your having changes when you try to operate them.


How do you replace emeregncy flasher 1996 S10 blazer?

Both the emergency and signal flashers are behind the plastic lower dash panel aprox under the radio. The panel must be removed to gain access.


How do you put in a flasher on a 1996 Chevy Blazer?

You need to remove the plastic lower dash panel to expose the signal and 4-way flashers. They are located aprox under the radio behind the lower panel.


Where is the flasher-stat for a 97 S-10 Blazer?

behind the glove box the flasher on a 1997 blaser is between the stering wheel and the lighter you have to take off the dash face its behind that That's exactly where I found it. I would like to point out that it's the bottom part of the dash. Once pulled, you will see two flashers just left of the where the cigarette lighter is. The one on the right is for the blinkers (I assume the left is probably hazard lights). A quick test to find out if it is the flasher, or just a possible burt out bulb is to see if the hazard lights work (since they are usually on a different flasher).

People also asked