Spark Plugs and Wires
Timing and Firing Orders
Saturn S-Series

Your 2001 Saturn SL1 will not pass emissions testing because it has a cylinder one misfire you tried changing the plugs and wires but to no avail Please help?

161718

Top Answer
User Avatar
Wiki User
Answered
2005-12-09 20:43:08
2005-12-09 20:43:08

Change the coil. Period. Very easy to remove from the vehicle if it's a 4 cyl. Follow that spark plug wire from the spark plug to the other end. What it's attached to you should replace.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


Cylinder #4 misfireCylinder #4 misfire

Cylinder #2 misfire.Cylinder #2 misfire.

It means that more than one cylinder has a misfire history. PO301 would be cylinder number 1 misfire. PO302 would be number 3 cylinder misfire.

po300-Random/multiple cylinder misfire detected. po303-Cylinder no. 3 misfire detected. po306-cylinder no. 6 misfire detected po300-Random/multiple cylinder misfire detected. po303-Cylinder no. 3 misfire detected. po306-cylinder no. 6 misfire detected

Cylinder number three misfire.Cylinder number three misfire.

Misfire detected in cylinder number four.Misfire detected in cylinder number four.

p0300 is a multi-cylinder misfire code it is because the logic circuit cannot determine which cylinders because they are random

Stop by http://www.coloradofans.com there are different people that have had that problem. you can probably message them personally and see how they got to that problem. P0300= Random/ multiple cylinder misfire detected P0301= Misfire detected- cylinder #1 P0302= Misfire detected- cylinder #2 P0303= Misfire detected- cylinder #3 P0304= Misfire detected- cylinder #4 p0305= Misfire detected- cylinder #5 P.S. These are Diagnostic trouble codes, not vechicle id numbers.

Random misfire, cylinder 2 misfire, and cylinder 3 misfire. see related question below.

P 0304 (M) CYLINDER #4 MISFIRE Misfire detected in cylinder #4

Misfire in Cylinder No. 8.

P0301 is cylinder number one misfire detected.P0301 is cylinder number one misfire detected.

Cylinder 1 and cylinder 4 misfire.See related question for more info.Cylinder 1 and cylinder 4 misfire.See related question for more info.

Cylinder #8 misfire.See related question below.Cylinder #8 misfire.See related question below.

Misfire on cylinder #2See related question below.Misfire on cylinder #2See related question below.

Multiple cylinder misfire Detected ..

P0302 (M) Cylinder #2 Misfire Misfire detected in cylinder #2

I talked to mechanic and he fixed 5th cylinder misfire on Dodge engine by changing chank shaft postition sensor. It came out on code reader though.

I have a 95, had a misfire... mine was because of the plug wires... changed the wires and plugs mis fire stopped...

The most common reason for a misfire is the ignition coil that is connected to the sparkplug on top of the problem cylinder.

I'm not a mechanic / technician but I BELIEVE if the fuel injector is restricted so that the proper air - fuel mixture is not getting to an engine cylinder , that an engine cylinder misfire can occur ( that is only one of the causes of an engine cylinder misfire )


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.