0
Your 2002 Chevy blazer will not start when I bump the starter everything goes dead interior lights and all what is the problem?
Wiki User
∙ 9y ago
There are several things that can cause everything to go dead when you bump the starter. The most common cause will be a loose or corroded ground wire.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
When I replaced a fuel pump in my 97 blazer it still won't start What could be the problem?
Dead starter?
You moved the flywheel while replacing the started on your 2000 Chevy blazer How can you get it back in line with the starter gear?
Not a problem. The starter gear will take care of that. It is autoaligning when you turn the ignition switch.
Where is solenoid located on 89 blazer?
The starter solenoid is attached to the starter.
What eles would cause a 96 blazer not to start I changed the starter the starter relay and the neutral safety switch The problem is inertmittent?
Your 1996 Chevrolet Blazer may not start due to a faulty ignition switch. The electronic fuel pump may also be faulty and need to be changed.
Where is the solenoid on 1992 Chevy s10 blazer?
The starter solenoid is attached to the starter.
Why won't my 94 Chevy blazer start It starts sometimes but then dies?
I had a Chevy blazer with the same problem. It had spark, fuel pressure, good battery & good starter. I sprayed some carburetor quick start spray & it started. They blazers have a problem with the fuel injection.
Is there a starter relay for a 1994 Chevy S-10 Blazer?
No, there is a starter solenoid located on the starter motor.
How do you change the starter on a 1997 Chevy Blazer?
Remove the positive battery cable from your 1997 Chevy Blazer battery. Remove the cables from the front of your starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
Where is the solenoid on 1984 Chevy S-10 blazer?
Starter solenoid? It is attached to the starter.
Where is the starter located on 1989 4.3l v6 Chevy blazer?
The 1989 Chevrolet Blazer 4.3 liter engine starter can be found on the right hand side of the engine. The starter will be near the back of the engine.
How do you change the starter on 1987 blazer s-10 with manual trans?
Remove the positive battery cable from your 1987 Chevrolet Blazer battery. Remove the starter cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
Where is the solenoid on a blazer starter?
It is mounted on top of the starter, to the starter. Follow the positive battery cable from the battery, it will lead you right to it.
