Want this question answered?
right around the trigger as a rule The breach is located at the rear of the barrel. A double barrel shotgun that breaks open at the rear end of the barrel is a breach loading weapon. Another example of a breach loading gun would be an artillery piece that was loaded at the rear of the barrel.
The breech area on any gun is the area where the pellet / bullet / BB is loaded into the barrel. The bullet stays here until the trigger is pulled.
Pointing the barrel in a safe direction and with your finger away from the trigger or hammer (if so equipped) carefully open the breech or cylinder of the weapon to see if a round is chambered or not.
The breech is the rear of the barrel, where a cartridge would be loaded. The muzzle is the front end of the barrel. When fired, a bullet is driven up the barrel, and out of the muzzle.
The Spring is the power source for the gun. When the gun is cocked the spring compresses and when the trigger is pulled the spring releases and pushes a piston that compresses a tube fill of air that fires a BB out of the barrel.
A loaded gun fails to fire when the trigger is pulled- misfire.
What you are describing could be a rifle that is not loaded, partially loaded or fully loaded, but, does not have a round chambered.
Meet Loaded Barrel Studios - 2008 was released on: USA: 6 June 2008 (New York City, New York)
Clarification: Muzzle Loaded - You poured powder down the barrel, packed it with the ram rod, put a ball in, packed it down with the ram rod, pulled the flint back, poured powder in the tray, pulled the trigger.
In 'Russian' roulette. A revolver is loaded with a single bullet, the barrel is spun, and each player puts the gun to their head and pulls the trigger. It can be applied to any situation where the people involved are put at random, and great, risk.
BB's are loaded on the left side just to the rear of the trigger. Pellets are loaded one shot at a time in the opening at the top of the rifle.
The cartridges will pop out.