Your printer spooler service getting stop?

How do you fix a printer that is stuck in queue?

Try to flush the print spooler: Control panel > Administrative tools > Services Select "Print Spooler" and choose to "Stop" the service, after that "Start" the service

I was trying to add a printer to my computer and it keeps on saying my Printer Spooler isn't working What is that?

The printer Spooler is the operating systems built it program the direct priority and location to send print jobs. try and find the sevices options on the Operating systems Admistrative tools, Find printer Spooling . Stop the service and then start it again u must click apply after sleceting stop and then again after start

How do you enable print spooler on windows xp?

mit "net start spooler" startet man den Druckspooler mit "net stop spooler" stopt man den Druckspooler alternative start -> systemsteuerung -> Verwaltung -> Dienste -> Druckerwarteschlange rechte maustaste ... soweit aus der Windowswelt

What tool can you use to stop and restart the Windows print spooler?

service console

How do you fix printer spooler error message?

When I had this problem I had to unload the applications and drivers for the printer, ensure there were no other printers installed, I only had the one, and then reboot and reinstall the applications and drivers. It then worked great. JonathonI can recommend Printer Spooler Fix Wizard if you want to do it fast. Very effective tool. Search for it in google or see related link.What is Spooler error?Spooling is a computer technique wherein data is transferred temporarily so that it can be accessed and processed later. Since data is processed at different speeds, it is useful in slower processes to provide a waiting area for other jobs while it is still trying to read the current batch of information. It's especially important in printers because this is actually the only means through which the computer communicates.The following information will provide a better understanding of spooler errorSymptoms of spooler errorResolving printer spooler errorVariation of printer spooler errorSymptoms of spooler errorTell-tale signs of a printer spooler error include system freezes, high CPU usage and print queues that don't let you print or delete a job. It is a very serious error that should be resolved at once.Resolving printer spooler errorThere are several ways to resolve printer spooler error, probably because there are many variations of this error. The error caused by faulty software can be resolved by deleting all the information found in the directory. Thereafter, navigate to the Control Panel, click on Administrative Tools and then services icon. Find the service labeled Print Spooler, highlight it and restart the process. If that doesn't work, the program might be corrupted. Click on start, then Run. Search for the document labeled services.msc, and this will trigger the opening of another window. On this window, scroll down and click "Print Spooler". Check its setting and turn on automatic mode. Click Okay, and restart the machine. If you're lucky, this might be all you have to do. Still doesn't work? Navigate to the Add/Remove Programs screen of the Control Panel. Find the all the software responsible for making the printer run including the drivers, and uninstall them. Be sure to be thorough about it, or the problem may not be solved. Download the latest copy of your Printer's software from the manufacturer and reinstall it.http://printers.iyogi.net/errors/printer-spooler-error.html

The correct syntex to restart the spooler service at the command line in windows?

If you have rights to do so, you may type in command prompt: net stop spooler for stopping spooler service and net start spooler for restarting it once again. Some people also may want to restart TCP printing service: net start lpdsvc

Why is previously working HP printer having issues with Vista missing files How can I fix this with the current Vista OS disc without loosing all my files?

You have to reinstall the driver for your printer. Check HP website for the driver which is compatible with Vista. Solution: 1: check printer spooler service if service stop and then restart. try to print test page. 2: If face still problem and then uninstall and reinstall again.

A network administrator has been informed about a problem with the network printer What is the most reliable way to prevent print jobs from being added to the queue while the printer is being repaire?

IT Essentials 1... Stop the print spooler.

Where can the HP 4600 be purchased?

The HP 4600 printer can be purchased at Amazon and Printer Stop. The toner cartridges can be purchased at Staples, Office Max, Amazon, and Printer Stop.

How do you stop your printer HP 4100 from printing continues prints?

If your HP LaserJet 4100 printer is continuously printing without stopping, it could be due to several reasons. Here are some troubleshooting steps to stop continuous printing: Cancel Print Jobs: Press the "Cancel" or "Stop" button on the printer's control panel to stop the current print job. If the printer continues printing after canceling the job, proceed to the next steps. Clear Printer Queue: On your computer, open the print queue or print spooler settings. Cancel any pending print jobs in the queue to stop them from printing. You can usually access the print queue by clicking on the printer icon in the system tray or navigating to the "Devices and Printers" section in the Control Panel (Windows) or System Preferences (Mac). Restart Printer: Turn off the printer and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on. This can help reset the printer and stop any ongoing print jobs. Check Printer Settings: Ensure that the printer settings are configured correctly on your computer. Make sure that the printer is not set to print multiple copies of the same document or to print continuously. Update Printer Drivers: Make sure that your printer drivers are up to date. Visit the HP support website, enter your printer model, and download and install the latest drivers for your operating system. Outdated or corrupted drivers can sometimes cause printing issues. Check for Firmware Updates: Ensure that your printer has the latest firmware installed. Visit the HP support website, enter your printer model, and download and install any available firmware updates following the instructions provided. Reset Printer to Factory Settings: If the issue persists, you may need to reset the printer to its factory settings. Refer to the printer's user manual or HP's support website for instructions on how to perform a factory reset. Contact HP Support: If none of the above steps resolve the issue, it may indicate a hardware problem or a more complex issue with the printer. Contact HP support or a qualified technician for further assistance and troubleshooting. By following these troubleshooting steps, you should be able to stop your HP LaserJet 4100 printer from continuously printing.

What is a lock file in Linux?

A lock file is used to synchronization. A program or process can check for the lock file, and if it is present and the current process does not own the lock file then some operations may be prohibited to the calling process. It is a way of making sure that other processes do not interfere with operations. For example, if you start the line printer spooling software it can create a lock file. This will stop other attempts to duplicate the line printer spooler because it is already running.

Why does 'Error 1068 The Dependency Service or Group Failed To Start' appear when starting the remote access auto connection manager or print spooler in Windows XP?

Best answer is that the registry is corrupted you can do the steps on this page if you can get it to work. Another way is to just download a default services reg file. It will definitely fix your problem, however you may have to reload some programs or reactivate some needed services. It will also speed up your computer processing. You can go to www.blackviper.com and check out the downloads section for your Windows build or go to Windows Support website and check their downloads section for a similar file. This will save you time and headache of trying to get the program (or whole system in my case) to work with no result. Make sure Network DDE and Network DDE DSDM are started in Services. You can get to services by going to Start, Run and typing Services.MSC