Want this question answered?
What is the valve clearance for a 2002 yamaha kodiak 400 4x4?
yamaha kodiak 400 4x4 YFM 400 FAR i bout this atv and dont know the year of manufaturer date
Yamaha Ultramatic Kodiak 400 Quad is not engaging gear changes so what may be the probable causes? The 4x4 engagement button works. All fuses check are good. Does the 4x4 engagement unit need to changed out?
If the machine has three chains , you need to tighten the center chain first . You want this chain tight with no slack . There is an eccentric at the front of center chain . Loosen the 2 bolts and rotate the eccentric to tighten the chain . With this tight do the front chain . This you want tight also , with no slack . The back chain needs to be tightened with the rider on machine . When you put weight on the rear of machine it tightenes the chain this is why rider needs to be on machine .There is 2 bolts on the rear eccentric that need to be loosened and then you rotate to tighten or loosen . With the rider on machine you want a half to 1 inch play in the center of chain . With no one on machine the chain will look loose but it is not .
I did the same thing on my quad
it depends on what u want is it speed or what? a 250 isnt super fast and will top out at about 60-70kph i would go for a raptor but dont get into mud u wont get out its not 4x4 is chain driven if u want 4x4 get a 450 kodiak or 350 kodiak about the same speed but with 4x4
At the front of the center chain in an essentric . there are two bolts that need to be loosened . once they are loose take a hammer and a punch and gently tap the eccentric .one way will loosen chain the other way will tighten chain . the center chain needs to be as tight as you can get it .tighten the bolts and then adjust the front chain as tight as you can get it . there is also an eccentric for the front chain . then with the usual riders weight on the machine tighten the rear chain . with the weight on the machine leave one to one and a half inch slack in chain in the center of chain .
Adjust carb on 400 Polaris 4x4 2stroke
The 1994 Nissan 4x4 2.4 four cylinder has a timing chain.
I have a stock 1999 Scrambler 400 4x4 that I GPS'd at 67mph and I'm 240lbs. They are quick for the price.
Timing chain
That would have a chain.