It's important to keep the wiper blades on a vehicle in good condition. Wiper blades can remove debris, improve visibility, and aid with snow removal during the winter. An older set of wiper blades can cause several problems: old wiper blades can leave streak marks, scratch glass, and can damage a wiper blade motor. The following guide provides simple tips to install a new set of wiper blades.
Measure the existing wiper blades installed on a vehicle. It's important to measure only the rubber part of a wiper blade. Wiper blade measurements are based on the length of the blade that comes in contact with the vehicle's glass. Never install a wiper blade that is too large for a vehicle. This can put excessive strain on a wiper blade's motor.
Old wiper blades are simple to remove. Lift the old wiper blades directly away from the windscreen. They should pivot on a 90 degree angle from the base of the blade. The back side of the wiper blade will have a small hinge attached by a spring. Lifting this hinge will allow the old wiper blade to be removed. Most blades will slide out of a slot after the hinge is removed.
A new wiper blade should be installed the same way the old blade was removed. Slide the new wiper blade into the empty wiper blade slot. Attach the hinge assembly to the mirror using the spring latch. This will help ensure that the wiper blade can't move. Push the wiper blade back towards the vehicle, and test to make sure that it is securely in place. Never operate an improperly installed wiper blade -- this can result in wiper blade motor damage, windscreen scratches, and a damaged wiper blade assembly.
Make sure to recycle old wiper blades when finished. Wiper blades are usually made from aluminum and rubber. Some auto repair shops will pay to recycle old wiper blades. This can be a great way to help the environment while saving money.
Replace wiper motor with a new one. Do not install a rebuilt motor on this vehicle.
Purchase new blades from your local auto parts store and they will install them for free (and you get to see how it's done).
The new wiper blades should have installation instructions on the packaging. Otherwise see the wiper blade installation videos below. The 2006 Toyota Tundra has hook end wiper arms. Look for a little button or tab where the wiper blade is inserted into the hook. Pull wiper blade out of the hook. You may have to rotate and flex the wiper blade to make enough clearance.
Fit new wiper blades.
The Chevrolet Malibu has standard u-hook arm attachments and takes the most common replacement wiper blades. That said, be sure to always lookup your new wiper blades by the make, model and year of your vehicle. The new wipers will come with complete replacement instructions. Also, see the installation video for hook arm attachments below.
1. Buy the correct-fit replacements. Correct replacement windshield wiper blades are not only correct length, but also correct attachment. Never just buy by length only. Always lookup your vehicle in an application guide at the store or now-a-days you can 'lookup wiper size' online. The key to an easy install is correct size/correct part numbers. 2. The new replacement wipers will have step-by-step, illustrated instructions. Take your new wiper blades and instructions out to your vehicle and physically get the old and new wipers in your hands and take a look. The instructions will make 100% sense once you're looking and touching them. 3. Most wiper replacements do not require tools and take approximately 2-15 minutes.
read the instructions that came with the new wiper blades
Its actually very easy once you purchase the correct replacement wiper blades. The 2009 Jetta has special "push button" wiper arm attachments. Not all wiper blades fit these arms so be sure to lookup your new wipers by vehicle make, model and year. Then watch the video below for installation procedure.
New styles of wiper blades are created annually. The biggest change was around 2000 with the introduction of the beam blade. See related link below.
pull off the wiper blade with and outward motion with your arm and slam the new set of wiper blades back on
To fix windshield wipers on a Volvo 940 try using new wiper fluid and cleaning the windshield and wiper blades before you replace the blades. It is also important to replace wiper blades regularly.
Some new wiper blades come with a clear plastic cover that protects the blade until you have installed it. Check to see if it is still on the blades.